Data Sheet

ManualsBrandsMEAN WELL ManualsPSU ComponentsAC/DC PSU module (+ enclosure) 1920 W

Factory control or automation apparatus

Test and measurement instrument

Laser related machine

Burn-in facility

Digital broadcasting

RF application

■ Features ■ Applications

2000W Power Supply with Single Output

RSP-2000 series

File Name:RSP-2000-SPEC 2020-03-27

■ Model Encoding / Order Information

■ Description

48RSP - -2000

Series name

Output wattage

Output voltage (12V/24V/48V)

Universal AC input / Full range

Built-in active PFC function

High efficiency up to 92%

Forced air cooling by built-in DC fan

Output voltage programmable

Active current sharing up to 8000W (3+1)

Built-in remote ON-OFF control / remote sense /

auxiliary power DC OK signal / OTP alarm signal



Protections: Short circuit / Overload / Over voltage

/ Over temperature

Optional conformal coating

5 years warranty

Dimension

295

11.6

127

41 (1U)

(1U)

inch1.61

RSP-2000 is a 2KW single output enclosed type AC/DC power supply with 1U low profile. This series operates

for 90~264VAC input voltage and offers the models with the DC output mostly demanded from the industry.

Each model is cooled by the built-in fan with fan speed control, working for the temperature up to 70 . ℃

Moreover, RSP-2000 provides vast design flexibility by equipping various built-in functions such as the

output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.

R33100

RoHS

CNS14336-1

UL62368-1 TPTC004 IEC62368-1EN62368-1

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

Summary of content (7 pages)

PAGE 1
2000W Power Supply with Single Output RSP-2000 series Dimension * W * H L 295 * 127 * 41 (1U) * 1.61 (1U) 11.6 * 5 mm inch Bauar t gepruft Sicherheit egel ma ge od o s be wac g R33100 RoHS CNS14336-1 www. tuv.
PAGE 2
RSP-2000 2000W Power Supply with Single Output series SPECIFICATION MODEL RSP-2000-12 RSP-2000-24 RSP-2000-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 100A 80A 42A CURRENT RANGE 0 ~ 100A 0 ~ 80A 0 ~ 42A RATED POWER 1200W 1920W 2016W 200mVp-p 300mVp-p 21 ~ 28V ±1.0% 42 ~ 56V ±1.0% RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 10.5 ~ 14V VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±1.0% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±0.5% ±0.
PAGE 3
RSP-2000 2000W Power Supply with Single Output series Block Diagram PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE INRUSH CURRENT LIMITING EMI FILTER I/P RECTIFIERS & PFC ORING FET RECTIFIERS & FILTER POWER SWITCHING +V -V -S O.V.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL DETECTION CIRCUIT ORING FET CONTROL MCU PV MCU TRANSCEIVERS DA/DB DATA ISOLATION T-Alarm DC-OK O.T.P. FAN AUX POWER Remote ON-OFF 12V/0.8A AUX POWER 5V/0.
PAGE 4
RSP-2000 2000W Power Supply with Single Output series Function Manual 1. Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V PIN2 -S +V PIN1 +S LOAD -V +V -V CN501 Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 2.
PAGE 5
RSP-2000 2000W Power Supply with Single Output series 4.Current Sharing with Remote Sense RSP-2000 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V.
PAGE 6
RSP-2000 2000W Power Supply with Single Output Mechanical Specification Case No. 952D series Unit:mm 271 25.4 20.5 7.8 6 3-M4 L=6 1 1 295 21 34.5 18.5 41 2-M5 59 -V +V 2 Air flow direction 12 11 2 1 CN502 21 43 65 2 3 2 1 10 7 CN504 90 127 CN501 SVR 3-M4 L=4 TB1 2 1 1 7.8 20.5 25.4 3-M4 L=6 6 271 Hole No. Recommended Screw Size 1 M4 2 M4 MAX. Penetration Depth L 6mm 4mm Recommended mounting torque 7~10Kgf-cm 7~10Kgf-cm ※Control Pin No.
PAGE 7
2000W Power Supply with Single Output RSP-2000 series ※LED Indicators & Corresponding Signal at Function Pins Function DC-OK DC-NG T-OK T-ALARM LED GREEN RED GREEN RED * Signal Description 0 ~ 0.5V When output voltage ≧ 80% ± 5% of Vo rated. 4.5 ~ 5.5V When output voltage ≦ 80% ± 5% of Vo rated. 0 ~ 0.5V When the internal temperature (TSW1 & TSW2 short) is within safe limit When the internal temperature (TSW1 or TSW2 open) exceeds the limit of temperature alarm 4.5 ~ 5.