Certificate

EC declaration of conformity
For the following equipment
Product Name: Switching Power Supplies
Model Designation: SD-1000x-y (x=L or H, y=12,24,48)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards were
applied
RoHS Directive (2011/65/EU)
Low Voltage Directive (2006/95/EC)
EN60950-1:2006+A11:2009+A1:2010+A12:2011
Electromagnetic Compatibility Directive (2004/108/EC)
EMI (Electro-Magnetic Interference)
Radiated emission
EN55022:2010
EN55011:2009+A1:2010
EN61000-6-3:2007
Class B
Class B
EMS (Electro-Magnetic Susceptibility)
EN55024:2010 EN61204-3:2000 EN61000-6-1:2007
ESD air
EN61000-4-2:2009
Level 3 8KV
ESD contact
EN61000-4-2:2009
Level 2 4KV
RF field susceptibility
EN61000-4-3:2006+A1:2008+A2:2010
Level 2 3V/m
EFT bursts
EN61000-4-4:2004+A1:2010
Level 2 1KV/5KHz
Surge susceptibility
EN61000-4-5:2006
Level 2 1KV/Line-Line
Conducted susceptibility
EN61000-4-6:2009
Level 2 3V
Magnetic field immunity
EN61000-4-8:2010
Level 2 3A/m
Note:
A component power supply with load will be installed into final equipment which consists of an electronically shielded metal enclosure.
Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive
on the complete installation again.
The EMC tests mentioned above are performed using a well defined metal plate to simulate said metal enclosure.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies”.(as available on
http://www.meanwell.com)”.
This Declaration is effective from serial number RB3xxxxxxx
Person responsible for marking this declaration
Mean Well Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 248, Taiwan (R.O.C.)
(Manufacturer Address)
Johnny Huang/Senior Verification Engineer
Ted Cheng/Product Manager
(Name / Position) (Signature)
(Name / Position) (Signature)
Taiwan
Sep. 16th, 2013
(Place)
(Date)
Version2

Summary of content (1 pages)