Certificate

EC declaration of conformity
For the following equipment：
Product Name: Switching Power Supplies
Model Designation: SD-15X-Y (X=A,B,C；Y=05,12,24)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards
were applied：
RoHS Directive (2011/65/EU)
Low Voltage Directive (2006/95/EC)：
The LVD is only to ensure safety within voltage ratings between 75 and 1500VDC
Electromagnetic Compatibility Directive (2004/108/EC)：
EMI (Electro-Magnetic Interference)
Radiated emission
EN55022:2010
EN55011:2009+A1:2010
EN61000-6-3:2007+A1:2011
Class B
Class B
EMS (Electro-Magnetic Susceptibility)
EN55024:2010 EN61204-3:2000 EN61000-6-1:2007
ESD air
EN61000-4-2:2009
Level 3 8KV
ESD contact
EN61000-4-2:2009
Level 2 4KV
RF field susceptibility
EN61000-4-3:2006+A1:2008+A2:2010
Level 2 3V/m
EFT bursts
EN61000-4-4:2012
Level 1 0.5KV/5KHz
Conducted susceptibility
EN61000-4-6:2009
Level 2 3V
Magnetic field immunity
EN61000-4-8:2010
Level 2 3A/m
Note:
A component power supply with load will be installed into final equipment which consists of an electronically shielded metal
enclosure. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.
The EMC tests mentioned above are performed using a well defined metal plate to simulate said metal enclosure.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies”.(as available on
http://www.meanwell.com)”.
This Declaration is effective from serial number EB4xxxxxxx
Person responsible for marking this declaration：
Mean Well Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 248, Taiwan (R.O.C.)
(Manufacturer Address)
Johnny Huang/Senior Verification Engineer：
Ted Cheng/Product Manager：
(Name / Position) (Signature)
(Name / Position) (Signature)
Taiwan
Mar. 21st, 2014
(Place)
(Date)
Version：1