Manualshelf

Certificates

ManualsBrandsMEAN WELL ManualsPSU ComponentsDC/DC-converter
1
Declaration of Conformity
For the following equipment：
Product Name: Switching Power Supply
Model Designation: SD-25x-y(x=A,B,C；y=5,12,24)
is herewith confirmed to comply with the requirements set out in the Council Directive, the following standards
were applied：
RoHS Directive (2011/65/EU)
Low Voltage Directive (2014/35/EU)：
The LVD is only to ensure safety within voltage ratings between 75 and 1500VDC
Electromagnetic Compatibility Directive (2014/30/EU)：
EMI (Electro-Magnetic Interference)
Conducted emission / Radiated emission
EN55032:2015 Class B
EMS (Electro-Magnetic Susceptibility)
EN55024:2010+A1:2015
ESD air
Level 3 8KV
ESD contact
Level 2 4KV
RF field susceptibility
Level 2 3V/m
EFT bursts
Level 2 1KV/5KHz
Surge susceptibility
Level 3 1KV/Line-Line
Conducted susceptibility
Level 2 3V
Magnetic field immunity
Level 2 3A/m
Note:
A component power supply with load will be installed into final equipment which consists of an electronically shielded metal
enclosure. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.
The EMC tests mentioned above are performed using a well defined metal plate to simulate said metal enclosure.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies”.(as available on
http://www.meanwell.com)”.
This Declaration is effective from serial number EB7xxxxxxx
Person responsible for marking this declaration：
MEAN WELL Enterprises Co., Ltd.
(Manufacturer Name)
No.28, Wuquan 3rd Rd., Wugu Dist., New Taipei City 248, Taiwan
(Manufacturer Address)
Johnny Huang/ Manager, Certification Center：
Alex Tsai/Director, Marketing Department：
(Name / Position) (Signature)
(Name / Position) (Signature)
Taiwan
Mar.10th, 2017
(Place)
(Date)
Version：5

Summary of content (1 pages)