Datasheet

SPECIFICATION
SP-75-3.3 SP-75-5 SP-75-7.5 SP-75-12 SP-75-13.5 SP-75-15 SP-75-24 SP-75-27 SP-75-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
REMOTE CONTROL(OPTION)
FUNCTION
AC CURRENT (Typ.)
3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
15A 15A 10A 6.3A 5.6A 5A 3.2A 2.8A 1.6A
0 ~ 15A 0 ~ 15A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 5A 0 ~ 3.2A 0 ~ 2.8A 0 ~ 1.6A
49.5W 75W 75W 75.6W 75.6W 75W 76.8W 75.6W 76.8W
80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 100mVp-p
±2.0%
3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0%
±0.5% ±0.5% ±0.5% ±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%±1.0% ±1.0% ±1.0%
800ms, 60ms at full load
36ms at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
PF>0.93/230VAC 0.96/115VAC at full load
70% 76% 79% 81% 82% 82% 83% 83% 83%
1.3A/115VAC 0.7A/230VAC
COLD START 45A/230VAC
<2mA / 240VAC
105 ~ 150% rated output power
3.8 ~ 4.46V 5.75 ~ 6.75V
8.63 ~ 10.13V 13.8 ~ 16.2V 15.53 ~ 18.23V 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 55.2 ~ 64.8V
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, re-power on to recover
CN3:4 ~ 10VDC POWER OFF, <0 ~ 0.8VDC POWER ON
UL60950-1, TUV EN60950-1 approved
Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
-10 ~ +60 (Refer to output load derating curve)℃
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH℃
±℃ ℃)0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
208.8K hrs min. MIL-HDBK-217F (25 )℃
179*97*33mm (L*W*H)
0.58Kg; 20pcs/12Kg/0.64CUFT
File Name:SP-75-SPEC 2015-07-09
75W Single Output with PFC Function

Universal AC input / Full range
Built-in active PFC function, PF>0.93
Protections: Short circuit / Overload / Over voltage
Built-in constant current limiting circuit
Low profile: 33mm thickness
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty
■
Features :
SP-75 series
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
EMC EMISSION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.