Datasheet

..
SPECIFICATION
TP-75A TP-75B TP-75C
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
5V
CH1
12V
CH2
-5V
CH3
5V
CH1
12V
CH2
-12V
CH3
5V
CH1
15V
CH2
-15V
CH3
7A 3A 0.6A 7A 3A 0.4A 6A 2.5A 0.5A
1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 3A 0 ~ 0.6A
74W 75.8W 75W
100mVp-p 120mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p
±3.0% ±3.0% ±3.0%
±3.0% ±3.0% ±3.0%
CH1: 4.75 ~ 5.5V
±4.0% ±4.0% ±4.0%
±4.0% ±4.0% ±4.0%
±8.0% ±8.0% ±8.0%
±8.0% ±8.0% ±8.0%
±1.0% ±1.0% ±1.0%±1.0% ±1.0% ±1.0%±1.0% ±1.0% ±1.0%
800ms, 60ms at full load
36ms at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
PF>0.95/230VAC PF>0.98/115VAC at full load
70%
1.5A/115VAC 0.8A/230VAC
COLD START 20A/230VAC
<2mA / 240VAC
105 ~ 150% rated output power
5.75 ~ 6.75V on +5V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, re-power on to recover
UL60950-1, TUV EN60950-1 approved
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
-10 ~ +60 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH℃
±℃ ℃)
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
198.4K hrs min. MIL-HDBK-217F (25 )℃
179*99*33mm (L*W*H)
0.65Kg; 20pcs/12.7Kg/0.64CUFT
75W Triple Output with PFC Function
•
Universal AC input / Full range
•Built-in active PFC function, PF>0.95
•Protections: Short circuit / Overload / Over voltage
•Low profile: 33mm thickness
•LED indicator for power on
•Cooling by free air convection
•Fixed switching frequency at PFC:67KHz PWM:134KHz
•3 years warranty
■
Features :
TP-75 series
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 1min.
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
OUTPUT NUMBER
File Name:TP-75-SPEC 2013-12-17
EMC IMMUNITY
EMC EMISSION