User manual

3
2.3 SystemBlockDiagram
Figure2.1SystemBlockDiagram
TN-1500Inverter
AC
Input
AC
Output
ACcharger
Solarcharger
Battery
Fuse
Fuse
12V/24V/48V
DC/DC
Converter
SolarPanel
EMI
filter
200VD C
CPU
Controller
Polarity
detect
DC/AC
Inverter
LOAD
120V/230V
Circuit
Breaker
50Hz/60Hz
/400VD C
LED
Display
A
B
C
D
E
F
G
3.1 FrontPanel
POWER on/off switch: The inverter will turn OFF if the switch is in the OFF
ACoutputoutlet: Tosatisfyapplicationdemandofdifferentgeographicareas
No Fuse Breaker; Reset: Under "Bypass Mode", when the AC output is
Ventilation holes: The inverter requires suitable ventilation to work properly.
Function Setting: Operating Mode, Output voltage, frequency, and saving
LEDIndicatingPanel: Operatingstatus,loadcondition,andalltypesof
Communication Port: For remote monitoring purpose, the unit can be
position.
allovertheworld,therearemanyoptional ACoutletstochoosefrom.
shorted or the load current exceeds the rated current of the No Fuse Breaker,
Please make sure there is good ventilation and the lifespan of the inverter can
modecanbesetthroughthisbutton.
warningswillbedisplayedonthispanel.
connected to a PC through this communication port by using the optional cable
andmonitoringsoftware.
preserved.
the No Fuse Breaker will open and that stops bypassing energy from the utility
getting to prevent possible danger. When the abnormal operating condition is
removed,usercanpressdownontheResetbuttontoresumeoperation.
3.Userinterface