Datasheet

ManualsBrandsMEAN WELL ManualsPOWERSwitched Mode Power Supply, 1kW, 48V, 21A

File Name:UHP-1000-SPEC 2019-07-29

UHP-1000 series

1000W Slim Type with PFC Switching Supply

■ Applications

■ Description



Industrial automation machinery

Industrial control system

Mechanical and electrical equipment

Electronic instruments, equipment

or apparatus

Test and measurement instrument



Laser related machine

Charging related equipment



Household appliances

UHP-1000 series is a 1000W single-output slim type power supply with 41mm of low profile design.

Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 12V,24V,36V

and 48V. In addition to the high efficiency up to 96%, that the whole series operates from -30 ~ 70 under℃℃

air convection without fan. UHP-1000 has the complete protection functions and 5G anti-vibration

capability; It is complied with the international safety regulations such as TUV EN62368-1, UL62368-1,

and design refers to EN61558-1 and EN60335-1. UHP-1000 series serves as a high performance

power supply solution for various industrial applications.

Slim and Low profile (41mm)

Fanless and conduction-cooled design

Withstand 300VAC surge input for 5 seconds

Built-in active PFC function

-~+30 70℃ working temperature

Output voltage and constant current level programmable

Protections: Short circuit / Overload / Over voltage /

Over temperature

Built-in remote ON-OFF control

DC OK active signal

Operating altitude up to 5000 meter (Note.5)

LED indicator for power on

5 years warranty

■ Features

■ Model Encoding

Rated wattage

Series name

UHP

1000

Output voltage

UL62368-1 EN62368-1

Bauar

Sicherheit

egel gema

t gepruft

www.

ID 2000000000

tuv.com

wac g

TPTC004

IEC62368-1

Safety: UL/EN62368-1

EMC: EN 55032 / 55024

■ Certificates

Summary of content (7 pages)

PAGE 1
000W Slim Type with PFC Switching Supply UHP-1000 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.
PAGE 2
UHP-1000 1000W Slim Type with PFC Switching Supply series SPECIFICATION MODEL UHP-1000-12 UHP-1000-24 UHP-1000-36 DC VOLTAGE 12V 24V 36V 48V RATED CURRENT 80A 42A 28A 21A 1008W 240mVp-p 1008W 240mVp-p 1008W 300mVp-p RATED POWER(convection) 960W RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT By built-in potentiometer, SVR VOLTAGE ADJ. RANGE 12~14.4V VOLTAGE TOLERANCE Note.3 ±1.0% ±0.5% LINE REGULATION ±0.5% LOAD REGULATION 1000ms, 50ms/230VAC SETUP, RISE TIME HOLD UP TIME (Typ.
PAGE 3
UHP-1000 1000W Slim Type with PFC Switching Supply series BLOCK DIAGRAM PWM fosc : 55KHz PFC fosc : 70KHz EMI FILTER & RECTIFIER I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V O.L.P. FG DETECTION CIRCUIT O.L.P. PWM CONTROL PV/PC SHUT DOWN O.V.P. O.T.P.
PAGE 4
UHP-1000 1000W Slim Type with PFC Switching Supply series FUNCTION MANUAL 1.Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed by applying EXTERNAL VOLTAGE. CN80 2 1 14 13 EXTERNAL VOLTAGE (DC) PIN3 PV PIN4 -GND-signal 12V 24V 36V 48V 100 Non-Linear 12 24 6 36 12 0 48 18 0 OUTPUT CURRENT (%) OUTPUT VOLTAGE(V) 14.
PAGE 5
1000W Slim Type with PFC Switching Supply UHP-1000 series 3.Remote ON-OFF Control The power supply can be turned ON/OFF individually or along with other units in parallel by using the "Remote ON-OFF" function. CN80 CN80 2 1 2 1 14 13 14 13 EXTERNAL VOLTAGE (DC) switch PIN8 -GND-signal Remote ON-OFF PIN8-GND-signal PIN7 Remote ON-OFF PIN7 Remote ON-OFF Power Supply Status “Low” <0~0.5V or Short circuit ON “Hi” >2~5V or Open circuit OFF 4.DC-OK Signal DC-OK signal is a TTL level signal.
PAGE 6
UHP-1000 1000W Slim Type with PFC Switching Supply MECHANICAL SPECIFICATION Case No.:272A series Unit:mm 240 232 8 4 TB2 9 1 2 2 TB3 115 1 3 99 8.25 3 7 TB1 4 5 6 1 2 SVR 4-ψ4.2 L=6 13 14 CN80 20.5 120 tc 41 tc : Max. Case Temperature AC Input Terminal(TB1) Pin NO. Assignment Pin No. 1 2 3 Assignment AC/L AC/N DC Output Terminal (TB2,TB3) Pin NO. Assignment Max mounting torque Terminal DECA T42-ES11-03 13.8Kgf-cm Pin No.
PAGE 7
UHP-1000 1000W Slim Type with PFC Switching Supply series Operate with additional aluminum plate and fan In order to meet the “Derating Curve” and the “Static Characteristics” , UHP-1000 series can be installed onto an aluminum plate(or the cabinet of the same size) on the bottom or apply forced air cooled solution. The size of the suggested aluminum plate and configuration of fan are shown as below.