Datasheet

2:1 wide input range
4:1 wide input range(option)
1000VDC I/O isolation
3000VDC I/O isolation(option)
Built-in EMI filter
Protections: Short circuit / Overload
Cooling by free air convection
Five-sided shield metal case
100% burn-in test
Low cost / High reliability
Approvals: FCC / CE
2 years warranty
SPECIFICATION
FileName:DCW05-SPEC 2012-10-04
DCW05A-05 DCW05B-05 DCW05C-05 DCW05A-12 DCW05B-12 DCW05C-12 DCW05A-15 DCW05B-15 DCW05C-15
ORDERNO.
DCVOLTAGE
CURRENTRANGE
RATEDPOWER
OUTPUT
SWITCHINGFREQUENCY
VOLTAGERANGE
EFFICIENCY (Typ.)
DCCURRENT
INPUT
ENVIRONMENT
SAFETY &
EMC
(Note.5)
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
ISOLATIONCAPACITANCE
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
FILTER
PROTECTION
VOLTAGE ACCURACY
A:9~18VDCB:18~36VDCC:36~72VDC
50KHzmin.
2.0%
0.5%
0.5%
50mVp-p 60mVp-p 60mVp-p
5W 5.5W 5.7W
100~ 500mA 46~ 230mA 38~ 190mA
5V 12V 15V
77% 82% 83%
A:586mA B:286mA C:139mA
A:41mA B:21mA C:12mA
I/P-O/P:1KVDC
I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH
80pF max.
900khrs min. MIL-HDBK-217F (25 )
-40 ~ +71 (refer to output load derating curve)
20% ~ 90% RH non-condensing
-40 ~ +105 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
31.8*20.3*12.2mm (L*W*H) or 1.25"*0.80"*0.48" inch (L*W*H)
15g
1.All parameters are specified at normal input, rated load, 25 70% RH ambient.
2.
3.
.
Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
Line regulation is measured from low line to high line at rated load.
4 Load regulation is measured from 20% to 100% rated load.
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
75%
Fullload
Noload
Pinetwork
77% 80% 83% 81% 85%
Features :
RIPPLE&NOISE(max.) Note.2
LINEREGULATION Note.3
LOADREGULATION Note.4
OVERLOAD
SHORTCIRCUIT
150~250%ratedoutputload
Protectiontype:Shuntdowno/pvoltage,re-powerontorecover
Alloutputequippedwithovercurrentprotection
Protectiontype:Shundowno/pvoltage, re-powerontorecover
MechanicalSpecification
Unit:mm(inch)
PinConfiguration
DeratingCurve
Ta( )
LOAD(%)
4.6()0.18
232
223
169
1411
BOTTOMVIEW
15.2()0.60
20.3(0.80)
12.2(0.48)
0.6+0.1/-0(0.024)
2.5( )0.10
5.0( )0.20
17.8(0.70)
31.8(1.25)
3.8()0.15
PinNo.
Output
2&3
9
11
14
16
22&23
-Vi n
COM
-Vout
+Vout
COM
+ Vi n
-40 0 25 50
71
60
80
100
100
5WDC-DCRegulatedDualOutputConverter
DCW0 5 se ri es
CompliancetoEN55022ClassB,FCCpart15ClassB
CompliancetoEN61000-4-2,3,4,5,6,8,lightindustrylevel,criteria A
PROTECTION
Fuserecommended
EMCIMMUNITY
EMCEMISSION
PinSizeis Tolerance0.5 0.05mm, Tolerance.Xor.XX= 0.5mm