User manual

PB-230 Instruction Manual

1.Makesurethechargerisshutoffandchoosingsuitablewirestoconnectthechargerandbatteriesbasedontheratingofcharging

current. Thepolaritymustbecorrect:chargeroutput(+)shouldbeconnectedtothe(+)terminalofbatteriesandchargeroutput(-)

shouldbeconnectedtothe(-)terminal.

Innotimesshouldthe(+)and(-)beshorttogetherorthechargerandbatterieswillbedamaged.

AssemblyProcedure

2.Connectthe ACinputandcheckwhethertheoperationofLEDiscorrect.

(red:charging;green:batteryisfull)

1.Thechargershouldbeassembledintheplacewithgoodventilationandlowmoisture.

Exposuretotherainorsnowisstrictlyprohibited.

2.Wiresconnectingbetweenthechargerandbatteriesshouldbeasshortaspossiblesincethehighvoltagedroponthewireswill

increasethetimerequiredto fullychargethebatteries.

3.Makesurethechargingvoltageandchargingcurrentaresuitableforthebatteriesyouareusing.

4.Ifthebatteriesneedtoconnectinseriesforcharging,oldbatteriesarenotsuggestedtobeusedwithnewonesorthelifetimeof

batteriesmayreducebecauseoftheunbalancechargingvoltagedistributiononnewandoldbatteries.

5.Pleaseturnoffthechargerbeforeconnectingordisconnectingthewires.

6.Thechargerhasa2-yearworldwidewarranty,however,damagesfrommisusingthechargerwillnotbeincludedinthecoverageof

warranty.

NotesOnOperation:

DCoutputconnector(standard)

DCoutputconnector(optional)

[housing: Anderson1327FP(red),1327G6FP(black)

contacts: Anderson261G2(45A)orequivalent]

AD1

Red(+V) Black(-V)

PINNO.

1,2

3,4

UNICABLE89M103-4P orequivalent

OUTPUT

-V

AD1(optional)

115cm 5cm

FUSE

Pleasemakesurethepolarityofthebatteryisconnectedcorrectly!

WARNING: