User manual

2
chargerwillgointo"floating-
charge"stage. TheLEDindicatorwillturntogreen. Therelationshipbetweenchargingcurrentandcharging voltageforeachoperation
stageareshowninthecurvesbelow:
StatusUnderGeneralOperation:
Atthebeginningstageofoperation,thechargerprovidesthelargestcurrentwith13.6Vdcofoutputvoltage(for12Vbatteries)to
chargebatteries. TheLEDindicatorwilllighteninred. Afteraperiodoftime(probablyacoupleofhours,basedonthecapacityof
batteries),thechargingcurrentwilldecreasegradually. Afterreaching10%ofitsmaximumvalue,the
ChargingCurrentand AmbientTemperature
Whenambienttemperaturebelow45 ,thechargingcurrentwillcarryonthechargebythemaximumcurrentsurpasses45 thecharge
currentwillreduceautomatically.
SuggestedBatteryCapacity:
1.Itwillnothaveanyproblemifthecapacityofbatterieslargerthanthesuggestedvalue.
2.Ifyouhaveanyquestionaboutthesuitablechargingcurrentforthebatteries,pleaserefertothetechnicaldataprovidedbythebattery
Itjusttakesmoretimetomakethebatteriesfullycharged!
manufacturersorconsultthevendorofthebatteries.
Model
PB-230-12 50-160Ah
PB-230-24 24-80Ah
PB-230-48 12-40Ah
SuggestedBatterycapacity
State
Vboost 14.4V
PB-230-12
28.8V 57.6V
PB-230-24 PB-230-48
VFLT 13.6V 27.2V 54.4V
ChargeCurrent
stage1 stage2 stage3
Float
Start
ChargeVoltage
V FLT
100%
10%
Red
ConstantCurrent
ConstantVoltage
Green
ColorofLED
boostV
LOAD(%)
EXTERNAL CASETEMPERATURE( )
90
100
80
70
60
40
30
40 45 50 60 70302010-20