Datasheet

SPECIFICATION
PS-35-3.3
PS-35-5 PS-35-7.5
PS-35-12
PS-35-13.5
PS-35-15
PS-35-24 PS-35-48
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT
VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDTIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
ACCURRENT (Typ.)
3.3V
5V 7.5V
12V
13.5V
15V
24V 48V
6A
6A 4.7A
3A
2.6A
2.4A
1.5A 0.75A
0~6A
0~6A 0~4.7A
0~3A
0~2.6A
0~2.4A
0~1.5A 0~0.75A
19.8W
30W 35.25W
36W
35.1W
36W
36W 36W
80mVp-p
100mVp-p
100mVp-p
120mVp-p
120mVp-p 150mVp-p 200mVp-p
240mVp-p
3.14~3.63V
4.75~5.5V
7.13~8.25V
10.8~13.2V
12.15~14.85V 13.5~16.5V 21.6~26.4V
43.2~52.8V
2.0%
2.0%
0.5%
0.5%
1%
1%
1200ms,30ms/230VAC,1200ms,30ms/115VACatfullload
50ms/230VAC,10ms/115VACatfullload
90~264VAC127~370VDC
47~440Hz
70%
78%
80%
81%
81%
81%
85%
84%
0.75A/115VAC0.5A/230VAC
COLDSTART 23A/115VAC45A/230VAC
<2mA /240VAC
105~150% 105~160%ratedoutputpower(3.3V: ratedoutputpower)
Protectiontype:shutdownO/P voltage,re-powerontorecover
-20~+65J( Refertooutputloadderatingcurve)
20~90%RHnon-condensing
-20~+85J,1 0~95%RH
Ó0 .05%/J( 0~50J)
10~500Hz,2G10min./1cycle,Periodfor60min.eachalongX, Y,Zaxes
101.6*50.8*24mm(L*W*H)
3.8~4.95V
5.75~6.75V
8.63~10.5V
13.8~16.2V
15.5~18.2V
17.25~20.25V
27.6~32.4V
55.2~62.4V
OVERVOLTAGE
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
UL60950, TUVEN60950-1 Approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
Complianceto EN55024,Lightindustrylevel,criteria AEN61000-4-2,3,4,5,6,8,11;ENV50204,
35WSingleOutputSwitchingPowerSupply
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 60KHz
2 years warranty
½ Features :
PS-35 se ri es
ENVIRONMENT
SAFETY &
EMC
(Note4)
PROTECTION
EMICONDUCTION&RADIATION
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
J
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
2.0%
0.5%
1%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved.
0.124Kg;96PCS/12.9Kg/0.8CUFT
588.8Khrs
FileName:PS-35-SPEC2011-01-28