Datasheet

SPECIFICATION
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE Note.5
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY(Typ.)
ACCURRENT (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
1500ms,50msatfullload
20msatfullload
88~264VAC124~370VDC
47~63Hz
84%79% 85% 85% 86% 86%
6.8A/115VAC3.4A/230VAC
20A/115VAC40A/230VAC
<1.3mA/240VAC
105~135% ratedoutputpower
Protectiontype:Constantcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
UL60950-1, TUVEN60950-1approved
-20~+60 (Referto"DeratingCurve")
20~90%RH non-condensing
-40~+85 ,10~95%RH
0.03%/ (0~50 )
10~500Hz,2G10min./1cycle,periodfor 60min.eachalongX, Y,Zaxes
116.4Khrsmin.MIL-HDBK-217F(25 )
170*120*93mm(L*W*H)
FileName:PSP-600-SPEC2012-06-04
12V5V 13.5V 15V 24V 27V
50A80A 44.5A 40A 25A 22.2A 12.5A
0~50A0~80A 0~44.5A 0~40A 0~25A 0~22.2A 0~12.5A
600W400W 600.75W 600W 600W 599.4W 600W
240mVp-p180mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 300mVp-p
10~13.2V4.75~5.5V 12~15V 13.5~18V 20~26.4V 24~30V 41~56V
1.0%2.0% 1.0% 1.0% 1.0% 1.0% 1.0%
0.5%1.0%
0.5%0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
PSP-600-12PSP-600-5 PSP-600-13.5 PSP-600-15 PSP-600-24 PSP-600-27 PSP-600-48
1.9Kg;8pcs/15.5Kg/1.06CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
OVERVOLTAGE
13.8~16.2V5.75~6.75V 15.5~18.2V 18~21V 27.6~32.4V 31~36.5V 57.6~67.2V
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC fan
With DC OK Signal output
Current sharing up to 2400W(3+1)
Built-in remote ON-OFF control
Built-in remote sense function
Fixed switching frequency at PFC:88KHz PWM:100KHz
3 years warranty
Features :
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:2KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC/25 /70%RH
ENVIRONMENT
PROTECTION
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
CompliancetoEN55022(CISPR22)ClassB, EN61000-3-2,-3
Complianceto lightindustrylevel,criteria AEN61000-4-2,3,4,5,6,8,11,
0.95/230VAC0.99/115VACatfullload
SAFETY &
EMC
(Note4)
PSP-600 se ri es
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
REMOTECONTROL
POKSIGNAL
FUNCTION
RC+/RC-:Short=poweron;Open=poweroff
PSUturnon:3.3V~5.6VPSUturnoff:0V~1V
OVERTEMPERATURE
+5V:95 (TSW1)detectonheatsinkofpowertransistor;95 (TSW51)detectonheatsinkofpowerdiode
+12V~+48V:85 (TSW1)detectonheatsinkofpowertransistor;80 (TSW51)detectonheatsinkofpowerdiode
Protectiontype: Shutdowno/pvoltage,re-powerontorecover
600WwithPFCandParallelFunction
87%
48V
EMCIMMUNITY
EMCEMISSION