Datasheet

ManualsBrandsMEANWELL ManualsPSU ComponentsAC/DC PSU module (+ enclosure) Mean Well 48 Vdc 21 A

RCP s er i es

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives.

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

6. Output of all the RCP-1000 modules are connected in parallel in the rack.

7. Under parallel operation of more than one rack connecting together, ripple of the output voltage may be higher than the SPEC at light load condition.

It will go back to normal ripple level once the output load is more than 10%.

For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.

(as available on http://www.meanwell.com)

SPECIFICATION-RackSystem

RCP-3K1U -12

RCP-3K1U -24 RCP-3K1U -48

MODEL

VOLTAGERANGE Note.5

MODULE

OUTPUTVOLTAGE

RACK

MAX.OUTPUTCURRENT

MAX.OUTPUTPOWER Note.6

FREQUENCY RANGE

INPUT

OUTPUT

LEAKAGECURRENT

ACCURRENT (Typ.)FOREACHUNIT

90~264VAC 127~370VDC

2160W 3024W

180A 63A

12V

RCP-1UIorRCP-1UT

48V

RCP-1000-12 RCP-1000-24 RCP-1000-48

47~63Hz

<3.5mA /230VAC

8.5A/115VAC4.5A/230VAC 10.5A/115VAC5.5A/230VAC 11A/115VAC5.5A/230VAC

SAFETY STANDARDS

WITHSTANDVOLTAGE

ISOLATIONRESISTANCE

WORKINGTEMP.

WORKINGHUMIDITY

STORAGETEMP.,HUMIDITY

TEMP.COEFFICIENT

VIBRATION

DIMENSION

PACKING

OTHERS

UL60950-1, TUVEN60950-1approved

CompliancetoEN55022(CISPR22)ClassB,EN61000-3-2,-3

CompliancetoEN61000-4-2,3,4,5,6,8,11,EN61000-6-2(EN50082-2),heavyindustrylevel,criteria A

-20~+60

(Referto"DeratingCurve")

20~90%RHnon-condensing

-40~+85 ,10~95%RH

0.02%/ (0~50 )

10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes

Rack483.6*350.8*44(L*W*H)

ENVIRONMENT

I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.7KVDC

I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH

11Kg;1pcs/11Kg/2.67CUFT

FileName:RCP series-SPEC2011-12-19

ACFAIL SIGNAL

DCOKSIGNAL

REMOTESENSE

REMOTEON/OFFCONTROL

AUXILIARY POWER

The TTL signalout,refertofunctionmanual

Compensatevoltagedropontheloadwiringupto0.5V

The TTL signalout,refertofunctionmanual

Compensatevoltagedropontheloadwiringupto0.5V."LocalSense"shouldbeconnectedinordertogetthecorrectoutputvoltageifthe"RemoteSense"isnotused

ByelectricalsignalordrycontactON:shortOFF:open

5V@0.3A

FUNCTION

Adjustmentofoutputvoltage,possiblebetween90~110%ofratedoutput

Logic"High"forovertemperaturewarning,refertofunctionmanual

SAFETY STANDARDS

WITHSTANDVOLTAGE

WORKINGTEMP.

WORKINGHUMIDITY

STORAGETEMP.,HUMIDITY

TEMP.COEFFICIENT

VIBRATION

UL60950-1, TUVEN60950-1approved

-20~+60

(Referto"DeratingCurve")

20~90%RHnon-condensing

-40~+85 ,10~95%RH

0.02%/ (0~50 )

ENVIRONMENT

I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.7KVDC

ISOLATIONRESISTANCE

MTBF

DIMENSION

PACKING

OTHERS

CompliancetoEN55022(CISPR22)ClassB,EN61000-3-2,-3

43.4Khrsmin.MIL-HDBK-217F(25 )

295*127*41mm(L*W*H)

SAFETY &

EMC

(Note4)

EMC

(Note4)

I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH

1.91Kg;6pcs/12.5Kg/1.04CUFT

OVERTEMP WARNING

OUTPUTVOLTAGETRIM

RCP-1000-12 RCP-1000-24

MODEL

RCP-1000-48

10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes

CompliancetoEN61000-4-2,3,4,5,6,8,11,EN61000-6-2(EN50082-2),heavyindustrylevel,criteria A

1000~3000WFrontEndPowerSystem

2880W

120A

24V

EMCIMMUNITY

EMCEMISSION