Datasheet

‧
Universal AC input / Full range
‧
Built-in active PFC function, PF>0.95
‧
Protections: Short circuit / Overload / Over voltage / Over temperature
‧
Forced air cooling by built-in DC Fan
‧
Output voltage programmable from 20~110% by 1~5.5VDC external
control signal
‧
Built-in remote ON-OFF control
‧
Built-in fan speed control
‧
Fixed switching frequency at 100KHz
‧
3 years warranty
SPECIFICATION
SPV-300-24SPV-300-12 SPV-300-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.)
Note.2
OUTPUT VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
ENVIRONMENT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
REMOTE CONTROL
OUTPUT VOLTAGE TRIM
OVER TEMPERATURE
SAFETY STANDARDS
SAFETY
WITHSTAND VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
PROTECTION
24V12V 48V
12.5A25A 6.25A
0 ~ 12.5A0 ~ 25A 0 ~ 6.25A
300W300W 300W
150mVp-p150mVp-p 240mVp-p
20 ~ 26.4V 10.8 ~ 13.2V 41 ~ 52.8V
±1.0%±1.0% ±1.0%
±0.2%±0.3% ±0.2%
±0.5%±0.5% ±0.5%
800ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
16ms/230VAC 16ms/115VAC at full load
88 ~ 264VAC 124 ~ 370VDC
47 ~ 63Hz
PF>0.95/230VAC PF>0.98/115VAC at full load
85%83.5% 86.5%
57.6 ~ 67.2V
9.6 ~ 52.8V
20A/115VAC 40A/230VAC
<1mA / 240VAC
4 ~ 10VDC power off, <0 ~ 0.8VDC power on
2.4 ~ 13.2V
105 ~ 135% rated output power
27.6 ~ 32.4V
4.8 ~ 26.4V
13.8 ~ 16.2V
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Protection type : Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, recovers automatically after temperature goes down
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
-20 ~ +65 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH ℃
± ℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
207K hrs min. MIL-HDBK-217F (25 )℃
215*115*50mm (L*W*H)
1.1Kg; 12pcs/14Kg/0.92CUFT
■
Features :
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
SPV-300
series
300W Single Output with PFC Function
FUNCTION
EMC
(Note 4)
ISOLATION RESISTANCE
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
AC CURRENT (Typ.)
5A/115VAC 2.5A/230VAC
EMC IMMUNITY
EMC EMISSION
File Name:SPV-300-SPEC 2014-12-12