Scanner User Manual

Pressure Systems, Inc. Model 9116 User’s Manual
Page iii www.PressureSystems.com
Table of Contents (continued)
3.1.3 Responses .......................................................................................................22
3.1.3.1 Interpreting Offset Values (Re-zero Calibration Adjustment)............. 23
3.1.3.2 Interpreting Gain Values (Span Calibration Adjustment) ...................23
3.1.3.3 Interpreting Engineering Units Output ...............................................23
3.1.4 Functional Command Overview ....................................................................... 23
3.1.4.1 Startup Initialization ........................................................................... 24
3.1.4.2 Module Data Acquisition....................................................................24
3.1.4.3 Calibration Adjustment of Offset/Gain Correction Coefficients ..........25
3.1.4.4 Delivery of Acquired Data to Host...................................................... 26
3.1.4.5 Network Query and Control Functions............................................... 27
3.1.4.6 Other Functions ................................................................................. 27
3.2 Detailed Command Description Reference.................................................................. 28
TCP/IP Commands
Power Up Clear (Command ‘A’) ....................................................................... 29
Reset (Command ‘B’) ....................................................................................... 30
Configure/Control Multi-point Calibration (Command ‘C’) ................................ 31
Sub-command Index 00: Configure & Start Multi-Point Calibration..............32
Sub-command Index 01: Collect Data for a Calibration Point ...................... 34
Sub-command Index 02: Calculate & Apply Correction Coefficients............ 36
Sub-command Index 03: Abort Multi-Point Calibration................................. 38
Read Tranducer Voltages (Command ‘V’)........................................................39
Calculate and Set Gains (Command ‘Z’).......................................................... 41
Read Transducer A/D Counts (Command ‘a’).................................................. 43
Read High-Speed Data (Command ‘b’)............................................................ 45
Define/Control Autonomous Host Streams (Command ‘c’) .............................. 46
Sub-command Index 00: Configure a Host Delivery Stream........................48
Sub-command Index 01: Start Streams(s) ................................................... 52
Sub-command Index 02: Stop Stream(s) ..................................................... 54
Sub-command Index 03: Clear Stream(s) .................................................... 55
Sub-command Index 04: Return Stream Information ................................... 56
Sub-command Index 05: Select Data in a Stream ....................................... 58
Sub-command Index 06: Select Protocol for Stream Delivery ..................... 61
Calculate and Set Offsets (Command ‘h’) ........................................................ 63
Read Temperature Counts (Command ‘m’) ..................................................... 65
Read Temperature Voltages (Command ‘n’).................................................... 67
Read Module Status (Command ‘q’) ................................................................ 69
Read High-Precision Data (Command ‘r’) ........................................................ 72
Read Transducer Temperature (Command ‘t’)................................................. 74
Read Internal Coefficients (Command ‘u’)........................................................76
Download Internal Coefficients (Command ‘v’) ................................................ 80
Set/Do Operating Options/Functions (Command ‘w’).......................................83
UDP/IP Commands
Network Query (UDP/IP Command ‘psi9000’) ................................................. 87
Re-Boot Module (UDP/IP Command ‘psireboot’) ............................................. 89
Change Module’s IP Address Resolution Method & Re-Boot
(UDP/IP Command ‘psirarp’) .............................................................90