Scanner User Manual

Pressure Systems, Inc. Model 9116 User’s Manual
Page 59 www.PressureSystems.com
bbbb (hex) data selected for inclusion in each stream packet
0001 ** Enable Valve Position Status (reserved for future use)
0002 Enable DH Temperature Status (see bit map below)
0010 Enable Pressure EU Data (default if “05” never executed after “00”)
0020 Enable Pressure A/D Counts
0040 Enable Pressure Voltages
0080 Enable DH Temperature EU Data (degrees C)
0100 Enable DH Temperature A/D Counts
0200 Enable DH Temperature Voltages
Any DH Temperature Status datum is delivered as a two-byte binary bit map (16-bit, big
endian) with each bit representing the status of DH #16 through DH #1 respectively. A bit value
of 0 (zero) indicates the DH is operating within its specified limits. A value of 1 (one) indicates
the DH is outside its specified limits.
Bit # 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Chan # 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Binary 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Hex 8 0 0 1
The above example indicates that Channels 1 and 16 are operating outside the specified
temperature limits.
Note
** This status field (0001) cannot be specified for Model 9116.
However it is shown should the capability be added to future
firmware versions. Currently, only Models 9816 and 903x can return
Valve Position status in their streams.