Datasheet

Electrical Specifications
Contact resistance
Insulation resistance
Recommended load
Contact bounce
Mechanical Specifications
Standard actuation
force (switch)
Max. actuation
force without cap
Key travel (switch)
Life time (switch)
Temperature Range
Working temperature
Storage temperature
Soldering IEC 68-2-20
Environmental Endurance IEC 68-2-3
Temperature
Humidity
Duration
Temperature Cycling IEC 68-2-14
Temperature limit
Number of cycles
Exposure time at each
temperature
Recovery time before
measurements
Sealing IEC 529
Cleaning
Vibration Test IEC 68-2-6
Cycles
Cycles time
Material Specifications - Switches
Housing
Actuator
Sealing + spring
Contact spring
Fixed contacts
Terminals
Material Specifications - Caps & Bezels
Material
ABS
Polycarbonate
LCP
PPS
Polyamide
Legends Adhesion
* LED max. working temperature
F3-E3-C3-A3F3-E3-C3-A3
Low Temperature Versions High Temperature Versions
Silver Gold Silver Gold
Ωm01.pyt-Ωm03<Ωm01.pyt-Ωm03<
ΩM01>ΩM01>
0.5-50mA 24VDC 0.5 µ -50mA 24VDC 0.5-50mA 24VDC 0.5 µ -50mA 24VDC
Sm5.0yllacipyt-Sm2<Sm5.0yllacipyt-Sm2<
.pytN0.3.pytN0.3
.ces01rofN001.ces01rofN001
mm1mm1
selcyc000.000.01>selcyc000.000.01>
C°061+.xaMC°04-.niMC°511+.xaMC°04-.niM
C°061+.xaMC°04-.niMC°511+.xaMC°04-.niM
Wave - max. 260°C for max. 10 sec., Infrared, vapour phase, wave - max. 240°C for
please refer to usage guidelines. max. 40 sec. or max. 260°C for max. 30 sec.
Soldering iron - max. 350°C for max. 3 sec. Soldering iron - max. 350°C for max. 3 sec.
.thgitxulF.thgitxulF
C°04+C°04+
HR%39HR%39
syaD65syaD65
Min. -55°C - Max. +85°C Min. -55°C - Max. +85°C
200200
.nim01.nim01
.srh61.srh61
76-PI76-PI
Standard methods - see usage guidelines Standard methods - see usage guidelines
OV49LUSPPOV49LUTBP
OV49LUSPPOV49LUTBP
rebburenociliSrebburenociliS
Stainless steel Stainless steel Stainless steel Stainless steel
+ 3µAg + 1µAu + 3µAg + 1µAu
SnCu + 2µNI + 3µAg SnCu + 2µNI + 1µAu SnCu + 2µNI + 3µAg SnCu + 2µNI + 1µAu
SnCu + 2µNI + 3µSn100 SnCu + 2µNI + 3µSn100 SnCu + 2µNI + 3µSn100
timilpmeTstraP
1A, 1B, 1C, 1D, 1E, 1F, 1H, 1K, 1M, 1N, 1P, 1Q, 1R, 1T, 1U, Max. 65°C
1V, 1WA, 1WD, 1WP, 1X, 1ZA, 1ZB, 1ZC.
All lenses, C°58.xaMsrotautcaderuolocE3
C°061.xaME3forotautcakcalB
C°061.xaMS, 1GA/1GC2,S1
C°061.xaM™cemiraVforotautcA
ISO Class: 1/ASTM Class: 4B DIN EN ISO 2409
cations please see www.mec.dk
Specifications are subject to change without notice.
multimec
®
technical specifications
RoHS Compatible
www.mec.dk
|
mec
|
0803www.mec.dk
|
mec
|
www.mec.dk
|
mec
|
www.mec.dk
|
mec
|
www.mec.dk
|
mec
|