Datasheet

ManualsBrandsMEC ManualsPush Actuated Switches & ButtonsPushbutton 24 Vdc 0.05 A 1 x Off/(On) IP67 momentary 1 pc(s)

multimec®

5 series switches

10 MILLION ACTUATIONS

IP 67 SEALING

NORMALLY OPEN (NO) OR

NORMALLY CLOSED/NORMALLY OPEN (NC/NO)

THROUGH-HOLE RIGHT ANGLE VERSION

QUIET CONTACT OPTION WITH 2.0N

multimec® 5 series is the new generation of 3A, 3F, 4A and 4F

switch. In principle the multimec® 5 series is very similar to the 3

series - it has the same pin layout, the same dimensions and the

same electrical specications.

e four main updates are the cap retention system and actuator,

three standard actuation forces, one temperature range and

possibility of normally closed/normally open function.

5E 5G

Summary of content (8 pages)

PAGE 1
multimec® 5 series switches 10 MILLION ACTUATIONS IP 67 SEALING NORMALLY OPEN (NO) OR NORMALLY CLOSED/NORMALLY OPEN (NC/NO) THROUGH-HOLE RIGHT ANGLE VERSION QUIET CONTACT OPTION WITH 2.0N multimec® 5 series is the new generation of 3A, 3F, 4A and 4F switch. In principle the multimec® 5 series is very similar to the 3 series - it has the same pin layout, the same dimensions and the same electrical specifications.
PAGE 2
multimec® 5 series switches 6,4 basic switch modules 0,8 0,8 4 0,3 Min 10,16 0,8 Max 12,5 7,62 7,62 10 8 12,2 10 1,8 6,4 10 10 ■■ Through-hole (TH) or surface mount (SMD) ■■ 50mA/24VDC ■■ Single pole/momentary ■■ 10,000,000 operations lifetime ■■ Temperature range: •• Switch: -40/+160°C •• LED: -40/+85°C ■■ IP 67 sealing ■■ Actuation force: 2.0N, 3.5N, 6.
PAGE 3
multimec® 13,9 5 series switches 12 11 5,08 4,8 7,62 7,62 8,0 to 22,5 5,5 1 7,62 22,3 7,62 5,08 11 12 11 12 10 7,4 5,5 PCB LAYOUT 12 13,8 5,5 11 5G + 1DS 10 6,5 12 11 5,5 13,8 5G + 1SS 10 13,9 5G 10 6,5 10 RIGHT ANGLE SWITCHES 5E basic switch modules 5,5 3 Ø1,0(3x) Ø1,0(3x) 22,3 4:1 5G RAS + 1SS 7,62 Ø1,0(3x) 7,62 4,85 7,62 1 3 Ø1,0(3x) 7,62 4,85 4,85 multimec® 5 series has 7,62 only normally open (NO) non-illuminated right angle switch.
PAGE 4
multimec® Technical specifications 5E-5G RoHS Compatible HIGH TEMPERATURE VERSIONS SILVER ELECTRICAL SPECIFICATIONS Contact resistance Insulation resistance Recommended load Contact bounce <30m Ω - typ. 10m Ω >10M Ω 0.5-50mA 24VDC <2mS - typically 0.5mS MECHANICAL SPECIFICATIONS Standard actuation force (switch) Max. Actuation force without cap Key travel (switch) Life time (switch) 2.0N, 3.5N, 6.
PAGE 5
multimec® LEDs For 5G and 3F switches LEDs specifications 5G switches Colour Colour Codes Blue 01 Green 22 Yellow 42 White 61 Red 82 60 20 150 5 -30/+85 -30/+85 245 for max. 10 sec 65 25 150 12 65 25 100 12 48 15 100 5 65 25 100 12 2.2 2.5 0.02 570 30 160 28 70 2.5 2 2.5 0.01 588 16 160 112 150 3.05 3.2 0.01 NA NA 150 71 224* 2 2.5 0.
PAGE 6
multimec® technical information Tape & Reel Tape and reel is available for the parts listed and has the following specifications: Reel diameter: Tape width: Pitch: Operating force (typical example) 10 Tape and reel material: Quantity per reel: Ø330mm 24mm see list force antistatic or better see list 9 8 3C/3E/5E/5G multimec®tape & reel 7 Ordering Code Pitch Quantity per reel 3CSH9 3CSH9R 16 500 3ESH9 3ESH9R 16 500 5ESH9XX 5ESH9XXR 16 500 5GSH9XX 5GSH9XXR 16 500 5XSH9XX1
PAGE 7
Circuit diagram for switches CR1 COMMON ANODE CR1 BLUE CATHODE CR1 GREEN CATHODE CR1 RED CATHODE CR4 COMMON CR4 BLUE CATHODE CR4 GREEN CATHODE CR4 RED CATHODE CR3 COMMON CR3 BLUE CATHODE CR3 GREEN CATHODE CR3 RED CATHODE CR2 COMMON CR2 BLUE CATHODE CR2 GREEN CATHODE CR2 RED CATHODE SW4 ANODE SW4 CONTACT SW4 CONTACT SW4 CATHODE SW5 ANODE SW5 CONTACT SW5 CONTACT SW5 CATHODE SW1 ANODE SW1 CONTACT SW1 CONTACT SW1 CATHODE SW3 ANODE SW3 CONTACT SW3 CONTACT SW3 CATHODE SW2 ANODE SW2 CONTACT SW2 CONTACT SW2 CATHO
PAGE 8
34 Min. 10,3 Min. 10,3 Min. 10,3 Min. 10,3 technical information multimec spacing multimec spacing spacing multimec multimec spacing spacing multimec spacing multimec spacing multimec spacing multimec spacing multimec spacing multimec spacing 34 34 34 Min. 12,7 Min. 12,7 34 34 34 34 Basic switch spacing ® Min. 15,24Min.