User's Manual

VI.

TECHNICAL SPECIFICATIONS

. Bluetooth® module class 2 (V2.0 EDR compliant) / HSP HFP SPP

. Bluetooth® compatible cell phones: MIDP 2.0

. HFP / HSP profiles support for hands free feature

. 32-Bit RISC architecture Microcontroller

. 3 motors (2 for driven wheels + 1 for camera tilt)

. Speed: 15cm/s – Turbo speed: 30cm/s

. 3 led

. CMOS Webcam (176x144 pixels array)

. Stereo loudspeakers (8kHz sampled sound)

. Microphone

. Buttons or software volume setting

. Line in for 3.5mm jack

. Made for iPod® dock (compatible with iPod® nano & iPod® touch, not included)

. Works with 6 AA batteries (not included)

VII.

HELP

I can't connect to my Spykee Cell

 Check the Bluetooth® connectivity on your mobile phone is activated. To do that, refer to the user guide

supplied by your mobile phone manufacturer.

 If your mobile phone connected automatically to your Spykee Cell, switch off Bluetooth® connectivity

and reactivate it manually (see Chap II : Connecting your Mobile Phone to Spykee Cell)

 Check you are close enough to your Spykee Cell (distance < 10 metres)

 Check there are no solid objects between you and your Spykee Cell

In robot control mode (Start), I do not have a picture or the picture is frozen

 Check the batteries on your robot

 The Spykee Cell robot might be beyond Bluetooth® range. Move closer to your Spykee robot (one or

more steps): if connection does not happen automatically, reconnect manually (see Chap II : Connecting

your Mobile Phone to Spykee Cell)

I can't hear the music

 Check your iPod® nano or iPod® touch is correctly seated on the iPod® dock connector

 Check your iPod® nano or iPod® touch is charged up

The lights do not come on

 Check the batteries

 One or more diodes might be damaged