Corp. Gas Grill User Manual

To reduce the risk of a laceration hazard:

• Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp.

CAUTION

Step 13

Warming Rack / Flavor Activator / Cooking Grid Assembly

Insert Warming Rack leg ends into holes on top edge of firebox. Seat securely.

B. Lay a large Flavor Activator over each Burner on the lower body ridges. Lay two small Flavor Activators between

each large Flavor Activator. Each Flavor Activator has individual guides on the body ridges to keep in place.

C. Place the Cooking Grids over the Flavor Activators on the upper Body ridges.

cooking grid

Step 14

Battery in Igniter Installation

Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten

securely.

Battery

AA 1.5v Alkaline

1 pc

This Completes the Grill Assembly.