Corp. Gas Grill User Manual

STEP - 8 Mounting Hood/ Bowl Hinges

•Insert M6 x 15mm Bolt through Hood Hinge and Fiber Washer and into hole in back side of Grill

Hood as shown. Install M6 Washer and secure with M6 Nut. (See Photos 1 & 2 below) Repeat for

remaining holes to secure two Hood Hinges.

•Insert M6 x 15mm Bolt through Bowl Hinge and Fiber Washer and into hole in back side of Grill

Bowl as shown. Install M6 Washer and secure with M6 Nut. (See Photos 3 & 4 below) Repeat for

remaining holes to secure two Bowl Hinges.

NOTE: DO NOT Overtighten mounting screws. You could crack the porcelain grill coating.

Hood

Bowl Hinge

2 pcs

Fiber Washer

8 pcs

Bolt

M6 X 15

8 pcs

Nut M6

8 pcs

Hood Hinge

2 pcs

Bowl

Hood

Photo 1

Photo 2

Photo 4

Washer

8 pcs

Hood Hinge

Photo 3

Bowl Hinge

Fiber Washers go

between hinge and

Bowl or Hood