Service manual

6-22 WPM Drive Systems Manual

BBC / BOS / BCS

TORO RECYCLER/REAR BAGGER

BBC

Idler Arm System Disassembly (Recycler/

Rear Bagger)

Fig 183 1350-001 a

1. Drain the fuel and oil. Remove the spark plug wire.

Disassembly for the idler arm begins on top of the

mower housing.

Fig 185 3428-0177-2

3. Take a loop of wire or rope and unhook the spring

under the lever (Fig. 185). With the tension removed

you can now remove the long screw through the

lever. We would suggest loosening this screw, but

leave it engaged at this time (Fig. 187).

Fig 184 3428-0174

2. On the left side of the mower next to the rear wheel,

loosen the clamp that secures the BBC cable to the

mower housing. Near the left front wheel, unhook

the spring end of the cable from the bellcrank.

Remove the screw, bellcrank, sleeve, and unhook

the control link from the lever (Fig. 184).

A. Spring C. Wire loop

B. Screwdriver