Service manual

6-32 WPM Drive Systems Manual
BBC / BOS / BCS
Fig 218 MVC-224
15. The anchor plate contains a pivot screw with a
bushing. Remove the locknut (Fig. 218).
Fig 217 MVC-223
14. Remove the two bolts holding the anchor plate to the
chassis (Fig. 217).
12. Rock the pulley half slightly and lift it off. The blade
bolts will now drop out of their pockets (Fig. 215).
Fig 215 MVC-220
13. Lift the crankshaft pulley half off of the crankshaft.
Note this pulley half is keyed to the crankshaft
and this pulley half is also the drive pulley for the
self-propel belt. Go to the transmission to continue
replacing the self-propel belt (Fig. 216).
Fig 216 MVC-222