Service manual

6-33WPM Drive Systems Manual

Brake Arm Assembly

BBC / BOS / BCS

A. Tab B. Notch

16. The bushing has a notch removed from the ﬂ ange

end. Align that notch in the bushing with the tab in

the anchor plate (Fig. 219).

Fig 219 MVC-257

1. Place the spacer with the large diameter down on

the brake arm (Fig. 220).

Fig 220 MVC-211

Fig 222 MVC-216

3. Install the belt, belt guide, and carriage bolt on the

brake arm and secure with the carriage bolt (Fig.

222).

Fig 221 MVC-213

2. Place the bearing with the ﬂ ange side down on the

spacer and place the washer on top of the bearing

(Fig. 221).