Service manual

7-8 WPM Drive Systems Manual

HANDLES AND CONTROL CABLES

Adjusting the Personal Pace/Easy Stride

Cable

Ensure the transmission belt is disengaged, transmission

tilted forward. Loosen the cable clamp on the handle.

When you pull the cable down the Personal Pace/Easy

Stride handle should raise to the stop. Hold the cable

and secure the clamp (Fig. 243).

Fig 243 DSC-4829

The engine stop cable is not adjustable. If it does not

function, it must be replaced.

The self propel cable is adjustable through a clamp. It

should be adjusted so that lowering the bail about 1”

(25mm) disengages the self propel. This is a gap that is

comfortable for most operators.

Fig 244 3428-0049

The 2 bail style is shown here (Fig. 244). The top bail is

the engine stop. Release it and the ignition is grounded

and a brake comes on to help stop the ﬂ ywheel. The

lower bail is the self propel bail. Squeeze it to tension the

belt and drive the transmission.

Lawn-Boy 2 Bail Handle