Service manual

1-4 WPM Drive Systems Manual

WORM DRIVE TRANSMISSION

4. Remove both front wheels and wheel covers (Fig.

005).

Fig 005 3428-0129

5. Pivot (both) front spring arms forward until they

point straight down. (This removes the tension from

the pivot arms so the roll pin can be removed) (Fig.

006).

Fig 006 3428-0131

2. Raise the front of the mower off the bench and

support it with blocks.

3. Disconnect the shift cable.

Fig 004 3428-0127

1. Remove the belt cover and unhook the spring on

the front of the transmission. Slip the belt off the

transmission pulley (Fig. 004).

A. Cable Clamp C. Spring

B. Shift Cable

Removal & Installation (front wheel drive

applications)