Service manual

3-11WPM Drive Systems Manual

SINGLE SPEED BEVEL GEAR TRANSMISSION

3. Remove the plug from the hole next to where the

self propel cable goes through the chassis (Fig.

062).

Fig 062 MVC-735

4. Tip the mower on its side. The cable snaps in from

the top and connects to an arm on the transmission

belt guide (Fig. 063).

Fig 063 PICT-1884a

Fig 064 PICT-1895a

5. The cable tool (P/N 105-6819) will compress the

locking tabs on the cable so it can be removed from

the housing.

6. Slide the cable tool over the end of the cable and

push (Fig. 064). At the same time, reach around the

mower and pull the cable out of the housing.

Fig 065 PICT-1904

7. With the plug removed from the larger hole next to

the cable, move the cable through the slot (Fig. 065).

A. Cable B. Belt guide

A. Cable tool