Service manual

3-12 WPM Drive Systems Manual
SINGLE SPEED BEVEL GEAR TRANSMISSION
12. Tip the mower onto its right side (carburetor up) and
remove the blade.
13. Remove one of the belt guide screws and loosen
the other enough to pivot the guide away (Fig. 069).
Do not bend the belt guide. Slide the pulley/blade
adapter and belt off the crankshaft.
Fig 069 MVC-738
Fig 066 PICT-1897
8. Push it into the larger hole (Fig. 066).
9. Remove both rear wheels and both wheel covers.
10. Remove the stop cable from the engine (Fig. 067)
and disconnect the self propel cable spring from the
transmission.
Fig 067 DSC-017
Fig 068 MVC-737
11. Pinch the ends of the lower handle together to
disengage them from the pins on the HOC plates
(Fig. 068).
A. Stop cable
A