Service manual

5-10 WPM Drive Systems Manual

WHEEL PINION CLUTCH

Fig 144 MVC-850

4. Slide the wheel pinion off the axle.

Note: There is a spring-loaded key under the pinion

(Fig. 144).

5. Behind the pinion should be another thrust washer

and retaining ring (Fig. 000). (MVC-850)

A. Retaining ring and B. Key

thrust washer

2. Lubricate with anti-seize and assemble in the

original order.

Reassemble in reverse order:

1. Install one thrust washer, then the ﬁ rst retaining ring

with the sharp edge facing the chassis (Fig. 145).

Fig 145 MVC-472