User manual

REMOTE SIDE BUTTON REPLACEMENT
Should the remote TPE side buttons get worn or damaged you
can install the spare set of button that are supplied standard with
the X3. Remove the side TPE side buttons. Place the correct
side solid button into position and push it firmly and the button
will self lock into position.
Page11
REMOTE FUNCTIONALITY
Remote Back Light
The X3 remote uses active Back Light technology. The activation button
is conveniently located on the right side of the remote for easy access in
the dark. Press the Back Light button and the remote buttons will light
up. The backlighting will auto switch ‘off’ after 15 seconds of no activity.
Press the Back Light button to manually switch ‘off’ the Back Lighting.
Remote Function Button
You can assign any button on the remote to the ‘Function’ button. This is designed to be used as a shortcut
button for a function that is used a lot.
To assign a button -- press the ‘Function Button’ for 3 seconds and the Remote will enter
‘Learn Mode’ and the LED will turn on solid. Now press the button you want to assign and it
will be learned and the LED will flash and then turn off. You can change the function button
assignment at any time by repeating this procedure.