Operation Manual

Zoom To Width - This zoom function is designed for full
screen viewing of older 4:3 aspect videos on a 16:9 TV.
Zoom To Height - This zoom function is
designed for full screen viewing of ultra wide
screen aspect videos on a 16:9 TV.
Zoom XY - The Zoom XY allows you to stretch the picture
horizontally and vertically independent of each other. This
zoom function is designed to correct videos encoded with the
wrong aspect ratio. You can also use the Zoom XY to zoom to
any zoom preference you may have. Once you have selected
your X and Y percentage press the ENTER button on the
remote to store the settings. To re-adjust the Zoom XY you
need to exit and then select Zoom XY again.
W
H X:100% Y:100%
ENTER
Zoom To Width
X:100% Y:100%
OFF
Zoom To Height
Zoom in/out
Page37
ZOOM
The X3 is equipped with advanced zoom functionality and once your screen is calibrated
you can zoom intuitively to either WIDTH or HEIGHT or XY of the video.
3D MENUS
The X3 supports 3D BSISO, Side by Side, Top & Bottom, Frame Sequential, Frame Packing (3D BDISO
Menus are not supported). Enable 3D playback on your TV. Select a 3D Video and Play it and then press the
Menu button on the X3 remote for more 3D setting options.
Toggle BD Menu on /off
If the BD Menu is set to ‘Off’ then the X3 will automatically switch to 3D mode
when using BDISO source material. All other 3D formats must be manually
selected. You can use the ‘F3' button the switch the BD Menu ‘on’ or ‘off’