Operation Manual

Transmission BT Downloader
WARNING: BT Downloader can use a lot of system resources
we suggest you switch it off while using the X3.
In order to use the Transmission BT downloader you will require as foll
1) Internal hard drive that have been formatted in the X3.
2) Valid Internet Connection
3) PC or Mac with Wired / Wireless Network connection to the X3
Navigate to the X3 Setup and select the “Network” tab. Now Select Transmission BT and set it to “on” Open
your PC/Mac web browser and enter the URL as shown on the Transmission on/off setup screen. ie
http://xxx.xxx.xxx.xxx:9091/transmission/web/. The xxx will be the actual IP of your X3 on your network.
Once you enter the above into the address bar of your Browser and Enter it will open the Transmission page
on the X3.
a) Add Torrents
Select the “Open” Icon and screen dialogue will open. Now navigate to the torrent file on your PC and then
select “Upload”. The torrent file will be uploaded to the X3 and a progress bar will be displayed on the
Transmission screen.
b) Manage Torrent Download
You can right click the download bar for available options. The main setup is located on the bottom left of the
Transmission web page and here you can set options such as Download and Upload speed.
All torrent downloads will be saved to the Transmission Download folder
on your Hard Drive. Note -- compressed downloads will have to be unzipped or
unrared on or via your PC and only complete downloads can be played.
You can also open the Transmisson BT page on the X3 built in Web Browser
BUT THE FUNCTIONALITY WILL BE LIMITED. You cannot add bittorents and
certain Setup setting will not work and may cause the X3 to crash.
Page44