User manual

CONNECTIONS CONTINUED
Page5
SD Card Slot
DC Power Jack
2 X USB Host Ports
DC input is specified at 12 Volt 2 Amp DC. Important-- Only use the supplied AC DC Adapter.
SD / SDHC / Sony Pro Due Memory Cards supported.
Host up to two external ‘Type A’ connector USB Devices. Note - Many USB External drives require an
independent power source and must be supplied power from there own power supplies.
Y
Pb
Pr
OUT
Y
Pb
Pr
OUT
Y
Pb
Pr
OUT
Y
Pb
Pr
OUT
SPDIF Optical Audio
For digital audio connection to your Home Theatre System you can use the TOSLINK Optical output. The
MED600X3D supports both Passthrough and Downmix for both Dolby Digital and DTS signals. If you want your
Home Theatre Amplifier to decode the surround sound Bit Stream you can use SPDIF Optical and set the Audio
Output to SPDIF Passthrough in the Setup menu.
Rj45 Ethernet Network
The MED600X3D is equipped with Rj45 connector for connection to a wired network.
Y
Pb
Pr
OUT