User manual

Page7

TV OUTPUT SETTINGS

If you do not get to see the MED600X3D GUI on your TV you will need to toggle the MED600X3D TV output

until you get a picture.

TV SYS Toggle Procedure

The MED600X3D has three video output options ie Composite Video (yellow RCA connector, Component

Video (Red - Green- Blue connectors) and HDMI. Each output option offers different screen resolution

settings and these will need to be adjusted to match the type of TV used.

It is suggested to use the Setup Menu to change the TV Out resolution. If you do not get a picture in the first

place then you can try to change the TV Out Resolution via the TV Sys button. To change the Video Output

on the MED600X3D press the TV SYS button on the remote and it will change the Video Output to the next

available output option. If after pressing the TV SYS button you still do not get a picture then press the TV

SYS again until you see the MED600X3D GUI on your TV. Keep repeating this procedure until you see a

picture on your TV.

AUDIO SETTINGS

Surround Sound

Select “Don’t Care” if you are using 2 CH stereo. If you are using SPDIF or Co-Axial Digital then

select “AC3". If you are using HDMI Audio to amplifier then select “True HD”

HDMI Auto

HDMI Auto is the suggested setting for HDMI Audio. All audio will automatically passed through to the

amplifier - Dolby / DTS Bitstream - Dolby True HD / DTSMA - PCM / Multi-Channel LPCM.

It is suggested to always use HDMI Auto in preference to HDMI Passthrough or LPCM Multi CH

SPDIF Passthrough

Use this setting to connect to an amplifier via Toslink optical cable or Co-Axial Digital RCA cable. The sound

will be passed through as Bitstream or PCM and the amplifier. Dolby True HD and DTSMA HD Audio and

Multi-Channel LPCM will not work on either SPDIF option.

SPDIF Downmix (2 channel)

Use this setting to connect to a Amplifier via Toslink optical cable or Co-Axial Digital RCA cable. The sound

will be downmixed to 2 channel stereo.

FORCE DECODE AAC/MP3

Use this setting if you do not get AAC/MP3 Audio with HDMI ‘Auto’ or Passthrough setting.

Once you see the MED600X3D GUI on your TV then you must enter the

Video Setup mode and adjust the Video settings to match the screen size

resolution of your TV.