Manualshelf

User's Manual

ManualsBrandsMedeco Security Locks ManualsElectronicsElectronic Lock - Wireless IEEE802.15.4/2.4GHz and RFID/125kHz
12345678910
4
A.2 - Mounting the Hub.
The included adapter plate can be used to mount the hub on a single or double gang box.
B. Wiring the Hub.
The Aperio Hub connects to the Access Control system via Wiegand wiring. The hub
requires 8-24VDC power (250mA). The hub includes three form C relays that can be used
to transmit Lock jamb status, low battery signal and a tamper signal. The hub connects to
the mortise lock wirelessly.
*Note: the Green LED input is used to grant access
to the M100 lock. If the Green LED signal is not
available to indicate approved access, the hub input
can be activated by another unlock signal or relay.
Connect Lock Jamb, Low Battery &
Tamper Detection Form C Relays