Operation Manual

DEMO
1. Hold on the [CLICK] button 2 seconds to enter the demo and
play the demo, the 3-digit-LED will display the demo “dE”.
2. Press [START/STOP] button to stop the demo playing.
1. Press [START/STOP] button play the pattern.
2. Press [ ] button again to stop the pattern playing.START/STOP
1. Press the [CLICK] button to start the click, the click indicator
will flash follow the beat.
2. Press the [CLICK] button again to stop the click.
PATTERN
KIT
VOICE CLICK
CLICK
MODE
PAGE
TEMPO
+
-
operations:
Turn on the power with
both [ + ] and [ - ] unreleased.
This function will replace the current settings of following
parameters by their default preset values:
Play the demo
Play the pattern
Play the click
Kit volume, voice number, voice volume and MIDI note.
Restoring the factory preset can be implemented by following
13
0
5
25
75
95
100
AW_DD402_manual_G11_110216
2011󾜀󾜀2󾜀󾜀16󾜀󾜀 14:44:53
De fabrieksinstellingen herstellen
De demo afspelen
Het patroon afspelen
De metronoom afspelen
De fabrieksinstellingen kunnen worden hesteld d.m.v. de volgende handeling: Zet het
apparaat aan met tegelijkertijd de toetsen + en – ingedrukt.
Hiermee worden de volgende parameters op hun standaardwaarde teruggezet: het
kitvolume, het geluidsnummer, het geluidsvolume en de MIDI-noot.
1. Houd de CLICK-toets gedurende 2 seconde ingedrukt om toegang te
krijgen tot de demo en deze af te spelen. Het LED-venster toont “dE”.
2. Druk op de STAR/STOP-toets om het afspelen van de demo te
beëindigen.
1. Druk op de START/STOP-toets om het afspelen van het patroon te
starten.
2. Druk nogmaals op de STAR/STOP-toets om het afspelen van het
patroon te beëindigen.
1. Druk op de CLICK-toets om de metronoom te starten. De Click-indicator
knippert in het ingestelde tempo.
2. Druk nogmaals op de CLICK-toets om de metronoom te stoppen.