Operation Manual

Power Supply
Your Digital Drum will run either from batteries or power adaptor. Follow the instructions
below according to the power source you intend to use.
Using an AC-Adaptor
Connect the power adaptor to the DC
IN jack located on the rear panel of the unit,
and plug the AC power adaptor into an AC
power outlet.
An optional set of stereo headphones
can be connected to the Headphones jack
located on the rear panel. When a pair of
headphones is connected to the jack, the
internal speakers of the unit will switch off
automatically, perfect for private practice
or late night playing. If you want to use an
external sound system, the headphone jack
can also be used to connect the digital drum
to a stereo system or mixing console.
* Turn the power OFF on all
equipment before making any connections.
Using Batteries
1
Open the battery compartment cover on
the underside of the unit.
2
OP
E
N
Insert six "C" size, R14, SUM-2 or
equivalent batteries. When inserting
the batteries, be care to follow the
polarity markings in the illustration.
3
Close the battery compartment securely.
OP
E
N
NOTES
Power will be automatically drawn from the AC
adaptor if an optional AC adaptor is connected
while batteries are installed in the instrument.
CAUTION
It is recommended that you replace worn batteries
as soon as possible. When battery voltage drops,
the display will dim and/or the sound will become
distorted. When this occurs, replace the batteries
with a complete set of six new batteries of the same
type.
NEVER mix old and new batteries, different types of
batteries (alkaline, magnesium, etc.), batteries by
different makers, or batteries from the same maker
but of different types.
Misuse may cause the instrument to become hot,
result in fire, or battery leakage.
Also, to prevent damage due to battery leakage,
remove all the batteries from the instrument when it
is not to be used for an extended period of time.
Batteries left in an unused instrument will also loose
their power overtime.
AC power
socket
Using Headphones
Do not use adaptors other than the one
specified. The technical specification
of the adaptor is 9V DC output, 800mA,
centre positive type.
Setting Up
3