Operation Manual

In KIT menu, you can modify the parameters as you like and save to the selected user kit.
Press the [KIT] or [PAGE] button.
Select the Kit Volume page.
Press the [ ] or [ ] button.
Adjust the kit volume.
Press the [KIT] or [PAGE] button.
Select the Global Reverb page and EQ pages.
Press the [ ] or [ ] button.
Switch Reverb ON or OFF.
Set the gain of three-band EQ (high, middle, low)
Press the [VOICE] button.
Select the Pad Voice page.
Press the [ ] or [ ] button.
Select the drum instrument of the selected pad.
Please refer to Drum Instrument List.
Press the [VOICE] or [PAGE] button.
Select the Pad Volume, Pad Pan, and Pad Pitch pages.
Press the [ ] or [ ] button.
Adjust the corresponding parameter.
Press the [SAVE] button.
The number of user kit will be flashed.
Press the [ ] or [ ] button.
Select a user kit to save your settings. (No. 25-40)
Press the [SAVE] button again.
Save the setting to the selected user kit.
SAVE
Press the [VOICE] or [PAGE] button.
Select the Pad Song and Song Number pages.
Press the [ ] or [ ] button.
Switch the Pad Song function ON or OFF. Select the Song
that begins playing when the following pad is struck.
KIT
TEMPO
BEAT
VOICE
TEMPO
BEAT
KIT
TEMPO
BEAT
VOICE
TEMPO
BEAT
VOICE
TEMPO
BEAT
VOICE
TEMPO
BEAT
10
1.
2.
1.
2.
1.
2.
1.
2.
1.
2.
1.
2.
3.
KIT
KIT
VOICE
VOICE
VOICE
HINT
If the edited kit isn’t saved before selecting
another kit, powering down the digital drum,
the changes will be lost.
Adjusting the Volume, Pan and Pitch of the Pad
Een drumkit bewerken en opslaan
In het KIT-menu kun je naar believen parameters bewerken en opslaan in de geselecteerde gebruikerskit.
1. Druk op de KIT- of de PAGE-toets.
Kies de Kit Volume-pagina.
2. Druk op de toetsen < of >.
Stel het Kit-volume in.
1. Druk op de KIT- of de PAGE-toets.
Kies de Global Reverb-pagina en EQ-paginaʼs.
2. Druk op de toetsen < of >.
Schakel de galm aan (ON) of uit (OFF).
Stel de gain van de driebands-EQ in (hoog, midden, laag).
1. Druk op de VOICE-toets.
Kies de Pad Voice-pagina.
2. Druk op de toetsen < of >.
Kies een druminstrument voor de gekozen pad.
Zie de Drum-instrumentenlijst.
1. Druk op de VOICE- of de PAGE-toets.
Kies de Pad Volume-, Pad Pan- en Pad Pitch-paginaʼs.
2. Druk op de toetsen < of >.
Pas de betreffende parameter aan.
1. Druk op de VOICE- of de PAGE-toets.
Kies de paginaʼs Pad Song en Song Number.
2. Druk op de toetsen < of >.
Schakel de Pad Song-functie aan (ON) of uit (OFF). Kies een song, die
vervolgens wordt afgespeeld de eerstvolgende keer dat de pad wordt
bespeeld.
1. Druk op de SAVE-toets.
Het nummer van de kit gaat knipperen.
2. Druk op de toetsen < of >.
Kies een gebruikerskit om de instellingen in op te slaan. (nr. 25-40)
3. Druk nogmaals op de SAVE-toets.
Hiermee sla je de instellingen op in de gekozen gebruikerskit.
Tip
Als de bewerkte kit niet is opgeslagen
alvorens een andere kit te kiezen, gaat
deze bij het uitschakelen van het toetsel
verloren.
Het volume van een drumkit aanpassen
Galm aan/uit-schakelen en EQ-instellingen
Keuze van geluid voor een drumpad
Volume, panorama en toonhoogte van een pad
Laat de pads een song afspelen
Een bewerkte kit opslaan