Operation Manual

Connecting with an External Sound Device
Using the Digital Drum as a Sound Module
24
The digital drum transmission channel for the drum kit is fixed to Channel 10. It will output MIDI data generated by
the triggers when hitting the pads or stepping on the Hi-Hat control pedal (Note ON/OFF, and Foot messages).
Song playback data and metronome notes are not transmitted.
Recording Your Performance to an External Sequencer
Setting MIDI Note Number to be Transmitted/Received by Each Pad
1.
2.
3.
4.
5.
Connect the MIDI OUT of the digital drum to the MIDI IN of your sequencer, and the MIDI OUT of your
sequencer to the MIDI IN of the digital drum. If you are using a software sequencer on a computer, you can
simply connect the USB port of the digital drum to a USB port of your computer using a single USB A-B
cable.
Setup the active track of your sequencer on Channel 10. Activate RECORD on your sequencer.
Play the pads of your digital drum.
Stop recording. Locate your sequencer to the start of your recording.
Playback the recorded sequencer.
1.
2.
3.
4.
Press the [VOICE] button in NORMAL mode, enter the VOICE menu.
Press the [PAGE] or [VOICE] button, select Pad MIDI Note page.
Press the [ ] or [ ] button, change the MIDI Note Number for each pad. Hit the pad you wish to set or press the
related Pad Select button.
Press the [SAVE] button twice to save to user kit.
When GM Mode is ON,Channel 10 will play the GM percussion kits.
When GM Mode is OFF, Channel 10 will play the digital drum internal kits.
Each drum kit can have it’s own set of MIDI note to be transmitted/received by each pad, useful for advanced
purpose. Normally, you’ll never need to change them, but if you want to change, please follow these step:
Connecting an external keyboard or sequencer to the MIDI Input allows you to use the digital drum as a multi-part,
polyphonic sound module to play various instrument parts in addition to your drums (for instance, Piano on
Channel 1, Bass on Channel 2, Strings on Channel 3, etc). The voices on each MIDI channel are selected using
MIDI Program Change messages (refer to GM Backing Instrument List ).
The MIDI system in the digital drum has 16 reception channels numbered from 1-16. Each of the channels is
responsible for a voice. When the instrument receives MIDI information from an external device, the active channel
is determined by the control message. Channel 10 is reserved for Drums. The digital drum has two options for
Channel 10: GM ON or OFF, as selected in MIDI UTILITY menu.
Note:
For more information on received MIDI messages, refer to MIDI implementation chart.
Kick
Snare
Snare R
Tom1
Tom1 R
Tom2
Tom2 R
Tom3
Tom3 R
Tom4
Tom4 R
Ride
Crash 1
Crash 2
Hi-Hat O
Hi-Hat HO
Hi-Hat C
Hi-Hat P
Splash
36
38
40
48
50
45
47
43
58
41
39
51
49
57
46
23
42
44
21
Trigger MIDI Note Trigger MIDI Note Trigger MIDI Note Trigger MIDI Note Trigger MIDI Note
Verbinden met een extern geluidsapparaat
MIDI-instellingen
Gebruik als geluidsmodule
Het MIDI-zendkanaal van de digitale drum staat vast op MIDI-kanaal 10. Deze verzendt MIDI-data die worden
gegenereerd door de triggers wanneer de pads worden bespeeld of het hihatpedaal wordt ingetrapt (note on/off en
voetcommandoʼs). Songafspeeldata en noten uit de metronoom worden niet verzonden.
Je spel opnemen in een externe sequencer
1. Verbind de MIDI OUT van de digitale drum met de MIDI IN van je sequencer, en de MIDI OUT van de sequencer
met de MIDI IN van de digitale drum. Wanneer je een software-sequencer in een computer gebruikt, kun je volstaan
met een enkele USB A-B-kabel.
2. Stel de actieve track in de sequencer in op MIDI-kanaal 10. Activeer RECORD in je sequencer.
3. Bespeel de pads van de digitale drum.
4. Beëindig de opname en zet de sequencer terug naar het begin van de opname.
5. Speel de opname in de sequencer af.
Te verzenden/ontvangen MIDI-nootnummer instellen per pad
Elke drumkit kan worden voorzien van een eigen set MIDI-noten die per pad worden verzonden/ontvangen; handig
voor gevorderd gebruik. Normaal gesproken hoef je dit niet te veranderen, maar als het toch moet, ga als volgt te
werk:
1. Druk op de VOICE-toets in de NORMAL-modus, ga het VOICE-menu in.
2. Druk op de PAGE- of de VOICE-toets, kies de Pad MIDI Note-pagina.
3. Druk op de toetsen < of > om het MIDI-nootnummer per pad te veranderen. Bespeel de betreffende pad of druk op
de betrokken Pad Select-toets.
4. Druk tweemaal op de SAVE-toets om de gebruikerskit op te slaan.
Door een extern keyboard of externe sequencer op de MIDI-ingang aan te sluiten, kun je de digitale drum gebruiken
als multipart, polyfone geluidsmodule om verschillende instrumentpartijen weer te geven naast je drums (bijvoorbeeld
piano op kanaal 1, bas op kanaal 2, strings op kanaal 3, etc.). De geluiden voor elk MIDI-kanaal kunnen worden
gekozen met MIDI Program Change-commandoʼs (zie GM begeleidings-instrumentenlijst).
Het MIDI-systeem van de digitale drum heeft 16 ontvangstkanalen genummerd van 1 - 16. Elk kanaal zorgt voor een
geluid. Wanneer het instrument MIDI-informatie ontvangt van een extern apparaat wordt het actieve kanaal bepaald
door het besturingscommando. Kanaal 10 is gereserveerd voor drumsounds/partijen. De digitale drum heeft twee
opties voor kanaal 10: GM aan (ON) of uit (OFF), ingesteld in het MIDI UTILITY-menu.
• Met de GM Mode aan (ON) geeft kanaal 10 GM drum/percussiekits weer.
• Met de GM Mode uit (OFF) geeft kanaal 10 de interne drumkits van de digitale drum weer.
Opmerking:
Voor meer informatie over MIDI-commandoʼs, zie MIDI-implementatiekaart.