Operation Manual

PAGE/SELECT
You may wish to adjust the sensitivity of the pads according to
your playing style and desired dynamic range.
For details on pad adjustments, refer to Advanced Use.
You can switch the click sound on and off by pressing [CLICK]
button. When the click plays at the current Time Signature and
Tempo (displayed in the top left corner of the LCD), the beat
indicators will swing accordingly. You can set the time signature
and interval, adjust the click volume and select the click sound
in the CLICK menu.
Press the [CLICK] button.
Start the metronome with click sound.
Press the [PAGE] button to select the click menu pages
and press the [ ] or [ ] button to adjust the parameters.
Press the [CLICK] button again.
Stop the metronome and exit the click menu.
You can adjust the tempo of the Metronome, the current song,
and the current learning pattern. The current tempo always
displays in the top left corner of the LCD.
Press the [TEMPO] button.
Press the [ ] or [ ] button.
Adjust the current tempo.
Press both [ ] and [ ] buttons at the same time, reset the
current tempo to its default value.
Note:
If there’s no operation, it will return to the previous menu page
automatically after 3 seconds.
UITILY
TEMPO
BEAT
UTILITY
TEMPO
BEAT
CLICK
TEMPO
BEAT
SONG
TEMPO
BEAT
9
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
Press the [UTILITY] button
The UTILITY indicator appears.
Strike a pad or press a pad select button to select the one
whose sensitivity is to be adjusted. The PAD indicator
shows the current selected pad.
Press the [ ] or [ ] button to adjust the sensitivity.
Press the [SAVE] button to save the current setting.
UTILITY
CLICK
CLICK
TEMPO
SAVE
Spelen
De gevoeligheid van een pad aanpassen
Gebruik de Metronoom/click-functie
Tempo aanpassen
Je kunt de gevoeligheid van een pad aanpassen aan je eigen spel en het
gewenste dynamische bereik.
1. Druk op de UTILITY-toets
De UTILITY-indicator verschijnt.
2. Bespeel een pad of druk op een Pad Select-toets om de pad te kiezen
waarvan je de gevoeligheid wilt aanpassen.
3. Druk op de toetsen < of > om de gevoeligheid te wijzigen.
4. Druk op SAVE om de huidige instellingen op te slaan.
Kijk voor meer details over pad-gevoeligheid bij Gevorderd gebruik.
Je kunt het click-geluid aan- en uitzetten door op de CLICK-toets te drukken.
Wanneer de click speelt in de huidige maatsoort en in het huidige temp
(getoond in de linker bovenhoek van het LCD-venster), loopt de beat-
indicator in hetzelfde tempo mee. Je kunt de maatsoort en het interval
instellen, het Click-volume aanpassen en het Click-geluid wijzigen in het
Click-menu.
1. Druk op de CLICK-toets.
Start de mertonoom met het click-geluid.
2. Druk op de PAGE-toets om de Click-menupaginaʼs te kiezen en gebruik de
toetsen < en > om de waarde van betreffende waarde te wijzigen.
3. Druk nogmaals op de CLICK-toets.
Stop de metronoom en verlaat het Click-menu.
Je kunt het tempo aanpassen van de metronoom, de huidige song en het
huidige oefenpatroon. Het huidige tempo wordt altijd aangegeven in de linker
bovenhoek van het LCD-venster.
1. Druk op de TEMPO-toets
2. Druk op de toetsen < en > om het tempo aan te passen.
3. Druk gelijktijdig op de toetsen < en > om de waarde terug te zetten op de
standaardinstelling.
Opmerking:
Als er niets wordt gewijzigd, keert het LCD-venster na 3 seconde terug naar
het voorgaande menu.