Owner's Manual

145
Assign the pedal functions as follows:
1. Press “Pedal” to enter the pedal settings menu.
2. Press a pedal and the function menu appears to the right. Select a module, then select a function.
Press both the [<] and [>] buttons to reset the selected pedal to its default setting.
3. Dierent pedal functions can be applied to dierent parts. Check the Part boxes to apply the current function to the
parts you want to control in real time.
Note!
Some functions can only be used on the controller pedal and not on the switch pedal. If a controller pedal
function is assigned to the switch pedal, the assigned function may not work correctly.
We strongly recommend that you use the ocial pedal accessories. The use of unocial pedals may cause
polarity problems. If you encounter this problem, you can try to adjust the polarity by stepping on the pedal
when turning on the instrument.
Controllers