Owner's Manual

Table Of Contents

Adjust the Split Point as follows:

1. Press the “Split” button on the main menu or press [GLOBAL SETTINGS] - “Keyboard” to bring up the Split Setting

menu.

2. Press the Chord name and use the [DATA DIAL] and [<]/[>] buttons to set a split point. Or, press the actual keyboard

key to set your desired split point.

The default chord split point is F#3, which is the same as the left hand split point. However, the two split points can be

set to dierent positions as needed.

To set two split points at the same time, press “Chord+L” to turn it on. Now these two split points will change together.

Tips:

Split Point (Left) cannot be set lower than Split Point (Chord), and Split Point (Chord) cannot be set higher

than Split Point (Left).

Chord Basics

This section is a brief introduction to the basics of chords.

Chord Construction

When three or more notes are played together, they form a chord. A chord is the basic component of harmony, and

each note in the chord is generally built according to a principle of thirds.

In most music, the fundamental chord is the “triad.” The notes that make up a chord are determined according to their

position: the lowest note is called the “root”, the one a third interval above the root is called the “third”, and the one a

fth interval above the root is called the “fth”.

Styles

Sound R1, R2, R3