Owner`s manual
Voice
Adjusting the Volume of Voices
In the mixer interface, you can adjust the levels and stereo position
(pan) of each voice.
1. Press the [MIXER] button to call up the Mixer display.
2. Press “Master” to call up the relevant setting display.
3. Press R1 “120” button in the volume box to call up a pop-up box
showing the adjustable range of volume.
4. Press the “+” or “-“ button or use the DATA DIAL, the [+] or the [-]
button to adjust the data.
5. Press R1 “0” button in the pan box to call up a pop-up box showing
the adjustable range of pan.
6. Press the “+” or “-“ button or use the DATA DIAL, the [+] or the [-]
button to adjust the data.
If you want to adjust the volume of other parts (R2, R3, L, Style, Song)
or the pan of other parts (R2, R3, L), just press the relevant button and
operate according to the above steps.
Adding Effects to Voices
There are three effects: Arpeggiator, Harmony, Chopper. You can apply
various effects to your voice.
Pressing “EFFECT” on main display or pressing “Effect” on voice
selection display will call up the Effect display.
Select the desired part
Press the “R1” button to call up a pop-up box as shown to the right.
Press the relevant button (R1,R2,R3,L) to select your desired part for
which you want to add effects.
Turn On/Off Effects
Press the “ ” button on Effect display to turn on/off all effects you’ve
set them on. When effects are ON, the box and the button will be
changed from gray to orange.
Press this “Arpeggiator” button to switch the arpeggiator effect ON or
OFF.
Press this “Harmony” button to switch the harmony effect ON OFF.
Press this “Chopper” button to switch the chopper effect ON OFF.
or
or
31
MIXER
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part2
2012912 13:03:26