Owner`s manual
Harmony
If you turn the harmony on, it automatically adds harmony parts to the
notes you play with your right hand—immediately giving you a more full
and professional sound.
In this example, harmony notes in the scale of C major (the chord
played in the left hand) are automatically added to the notes played in
the Chord section right-hand range of the keyboard.
Press the “ ” button on the Effect display to call up the
Harmony Setting display.
There are nine harmony types: Duet、Trio、Octave 1+5、Country
Duet、Block、4 Close 1、4 Close 2、4 Open. Octave or 1+5 effect is
always added by playing a melody with your right hand. The others
effect is added by playing chords with your left hand and melodies with
your right hand.
Ratio: 20%、40%、80%、100%.
You can adjust the volume level of harmony parts.
Touch Limit: 0-127
You can set the minimum of the response velocity. If you
play a melody with your right hand at a velocity less than
the setting value, the Harmony part will not be added to the
notes.
Chopper
If you turn the chopper on, it automatically adds chopping effect to the
notes you hold down. Since the Chopper effect is added by detecting
pressed keys. If you release the key, it automatically turns the chopper
effect off.
Press the “ ” button on the Effect display to call up the
Chopper Setting display.
There are two play modes: Use Pattern or Real-Time.
Mode 1: Use Pattern
There are 10 user patterns you can select. Press the Pattern
“001” on the Chopper Setting display to call up a pop-up box
showing the the available patterns for selection.
Mode 2: Real Time
There are 2 parameters you can change.
Interval: 1/1, 1/2, 1/4, 1/8, 1/16
Pull-up Time: 5-100
Press the Interval “1/16” on the Chopper Setting display to call up a
pop-up box showing the available interval values for selection.
Harmony...
Chopper...
Voice
35
Split Point
Chord section
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part2
2012912 13:03:28