Owner`s manual
Voice
Reverb and Chorus
Reverb: You can create a reverb effect that makes you sound like you
are playing in places like a concert hall, or live in a club.
Chorus: You can add a chorus effect that makes your playing sound as
though multiple parts were being played together at the same
time.
You can select the reverb type and adjust the master reverb level and
the channel reverb level.
You can also select chorus type and adjust the master chorus level and
the channel chorus level.
Turn On/Off Global Effect and Adjust the Parameter
1. Press the “EFFECT” button on main display to call up the Effect
display.
2. Press the “Global Effect” button on the Effect display to turn on
Global Effect. This applies the reverb and chorus effects to the
entire sound of the instrument.
3. Press the “ ” button on the Effect display to call up the
Global Effect Setting display.
4. Press the Type relevant button (ex. “Hall”) to call up a pop-up box
showing the reverb types.
5. Press the relevant type button or use the DATA DIAL, the [+] or the
[-] button to select the reverb type.
6. Press the Master Level relevant button (ex. “64”) to call up a pop-up
box showing the adjustable range of reverb master level.
7. Press the “+” or “-” button or use the DATA DIAL, the [+] or the [-]
button to adjust the data.
8. Press the channel level relevant button (ex. R1 send “40”) to call up
a pop-up box showing the adjustable range of reverb channel level.
9. Press the “+” or “-” button or use the DATA DIAL, the [+] or the [-]
button to adjust the data.
If you want to adjust the parameter of chorus, just press the relevant
button and operate according to the above steps.
Global Effect...
Global Effect
36
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part2
2012912 13:03:28