Owner`s manual
Song Recording
4. Stop recording
Press the “STOP” button on the Record Display or press the
[RECORD SONG] button. The LED of [RECORD SONG] will go
out.
If you are recording style, press the [ENDING] button, when the
Ending is finished, the recording would also stop automatically.
5. Save recording data.
When the soft keyboard is called up, please enter the new name
and press “OK” to save the new user song.
Note:
The recorded song data will be lost without executing the save
operation.
6. Press the [PLAY/STOP] button to playback the song you just
recorded.
Multi Track Recording
A song consists of 16 separate channels. With this method, you can
record data to each channel independently, one by one. Both Keyboard
and Style parts can be recorded.
You can also record over already-recorded parts of an existing User
Song.
1. Press the [RECORD SONG] button to call up the Recording
Display.
If the current song is user song, this user song is called up for new
recording.
If the current song is preset song, a blank song (“New Song”) is
called up for recording.
2. Set the desired channels to record.
Normally, the keyboard parts (R1, R2, R3, L) should be recorded to
channels 1–4, and the styles should be recorded to channels 9–16.
Note:
Press the “Rec ACMP” button to switch accompaniment recording on.
3. Select voices for keyboard parts and select a style.
4. Press the [RECORD SONG] button or press the “RECORD” button
on the Recording Display to enter recording standby mode.
5. Press the [RECORD SONG] button or press the “START” button on
the Recording Display to start recording.
6. Press the [RECORD SONG] button or press the “STOP” button on
the Recording Display to stop recording.
7. Press the [PLAY/STOP] button to listen to your newly recorded
performance.
8. To record another channel, repeat steps 2-7.
55
PLAY/
STOP
ENDING 1 ENDING 2
METRO.
NEW SONG
SONG
RECORD
METRO.
NEW SONG
SONG
RECORD
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part2
2012912 13:03:30