Owner`s manual
Global Setting
Multi Pad
The Multi Pads can be used to play percussion and pre-recorded chord
that can be used to add impact and variety to your keyboard
performances.
Press any of the MULTI PADS to play the Multi Pad phrase.
Pressing “Pad” tab on the Controller Setting display will call up the Pad
Setting display.
Press the [MULTI PAD] button or press the pad button to select a pad
to be edited.
Assign PLAY DRUM function to the pad
You can assign the pad to PLAY DRUM function.
1. Press the “drum” button to select.
2. Press the “voice” button to call up the Drum Set Selection Display.
3. Press the “Assign” button to start assigning.
4. Play any key and listen until you satisfied with this percussion.
5. Press the “Assign” button again to finish assigning.
Now, Press the pad to play the assigned percussion.
Assign PLAY CHORD function to the pad
You can assign the pad to PLAY CHORD function.
1. Press the “Chord” button to select.
2. Press the “Rec” button to start recording.
3. Play the notes on the keyboard that you want to record.
4. Press the “Rec” button again to stop recording.
Now, Press the pad to play the recorded chord.
Assign other functions to the pad
You can assign the pad to START/STOP function. Press the pad to
start or stop playing the current song or style.
You can assign the pad to TEMPO TAP function. Press the pad four
times to automatically start the song or style at that tapped speed.
You can assign the pad to EFFECT SWITCH function, and press the
relevant button to select the applied keyboard part.
60
2 3 41
6 7 85
0
5
25
75
95
100
aw_GRAND1000_Manual_G06_120912Part2
2012912 13:03:30