User Manual

FUNCTION
Press and hold the [SHIFT] button and then press the [FUNCTION]
button to enter function menu. The LCD displays the current function
menu option. Use [+/YES]/ [-/NO] button or the data dial to adjust the
parameter of the current option.
The option and parameters are as follows:
Note:
It will exit the function menu if there is no operation in 5 seconds.
Tune
This function sets the pitch of entire keyboard in 2-cent increments.
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select the tune menu. The LCD displays
“xxx Tune”.
Use [+/YES]/ [-/NO] button or data dial to change tune value. Its
range is from -50 to 50 cents.
2. Press [+/YES] and [-/NO] buttons simultaneously will set the tune
value to its default setting: 0.
The setting applies to both accompaniment and the voice.
Split Point
This function sets the point which separates the entire keyboard to
two sections. The left hand section controls the auto bass chord
accompaniment when the A.B.C. function is on, or it plays the lower
voices when the A.B.C. function is off.
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select split point menu. The LCD displays
“xxx Split Pt”. Use [+/YES]/ [-/NO] button or data dial to change
Split Point. The range of Split Point is: 1~61.
2. Press [+/YES] and [-/NO] buttons simultaneously will set the split
point to its default setting.
Note:
The Split Point belongs to the left hand area.
16
Function Menu
Content
Tune
Split Point
Beat Type
Pedal Type
EQ Type
Reverb Type
Reverb Level
Chorus Type
Chorus Level
Harmony Types
MIDI Receive
MIDI Transmit
Auto Power Off
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
Tune
Split pt
Beat
Ped XXX
EQ XXX
RevHall1
Rev Lev
ChrGMCr2
Chr Lev
HrmDuet
Midi In
Midi Out
PowerOff
LCD display
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
Range
-50 ~ +50
1-61
0, 2-9
Ped Sust, Ped Soft, Ped Mem, Ped St/S
EQ Pop, EQ Rock, EQ Class,
EQ Jazz, EQ Dance, EQ Reset
RevRoom1, RevRoom2, RevRoom3,
RevHall1, RevHall2, RevHall3, RevChrh1,
RevChrh2, RevDelay, RevPnDly
0-32
ChrChrs1, ChrChrs2, ChrGMCr1, ChrGMCr2,
ChrFlgr1, ChrFlgr2, ChrRtry1, ChrRtry2
0-32
HrmDuet, HrmStdTri, HrmFulCd, HrmRkDut, HrmCtDut,
HrmCtTri, HrmBlock, Hrm4Cls1, Hrm4Cls2, Hrm4Open,
Hrm1+5, HrmOctv1, HrmOctv2, HrmStrum
01-16, ALL
01-16
30, 60, OFF
Default
0
19
4
Ped Sust
EQ Reset
RevHall1
20
ChrGMCr2
0
HrmDuet
ALL
01
30
SHIFT
SHIFT
PIANO
FUNCTION
PIANO
FUNCTION
PIANO
SHIFT
C
M
Y
CM
MY
CY
CMY
K
AW_M331_Manual_G08_161013.pdf 16 16/10/13 11:06