User Manual

DSP

The DSP simulates sounds in the real environment. With the DSP

effect, you can add ambiance and depth to your performance in a

variety of ways.

1. Press and hold the [SHIFT] button and then press the [DSP] button

to set the DSP effect on. The DSP indicator lights up on LCD. The

DSP effect is automatically activated when turning on the instrument.

2. Press and hold the [SHIFT] button and then press the [DSP] button

again to turn DSP effect off.

Transpose

1. Press and hold the [SHIFT] button and then press the

[TRANSPOSE] button to enter the transpose menu. The LCD

displays “xxx Transpos”.

2. Use [+/YES]/ [-/NO] button or data dial to change transpose value,

adjustable range:-12~ +12, the default value is: 0.

Harmony

The harmony function will automatically add harmony effect to the notes

you play in the right-hand section, which gives you a rich and harmonic

expression.

1. Press the [CHORD] button to turn on the A.B.C. function.

2. Press the [HARMONY] button to turn the harmony effect on.

3. Play a chord in the left hand section.

4. As soon as you play in the right hand section, it will automatically

add harmony effect to the notes you play.

Note:

1. Harmony cannot be turned on when the Full Range fingering mode

is selected.

2. The harmony types of “1+5”, “Octave 1” or “Octave 2” are always

available. Other types of harmony will respond only when the A.B.C.

is ON.

Effect Related Settings

MIXER

RANSPOSE

SHIFT

CMY

AW_M331_Manual_G08_161013.pdf 21 16/10/13 11:06